| TOPIC |
|
Name |
Day |
Start |
Finish |
Link to abstract |
Abstract Title |
| Plenary Lectures |
|
Hunter Abigail |
27/06/2022 |
14:00 |
14:30 |
See abstract |
Mesoscale Investigation of Dislocation-Grain Boundary Interactions in Metals and Alloys |
| Plenary Lectures |
|
Kailas Satish |
27/06/2022 |
14:30 |
15:00 |
See abstract |
High-Strength High-Ductility Polymer Derived Ceramic Metal Matrix Composites |
| Plenary Lectures |
|
Pardoen Thomas |
27/06/2022 |
09:30 |
10:00 |
See abstract |
On the best compromise between strength, ductility and fracture toughness in metallic alloys |
| Plenary Lectures |
|
Ghazisaeidi Maryam |
28/06/2022 |
14:00 |
14:30 |
See abstract |
Stacking fault energy in concentrated alloys |
| Plenary Lectures |
|
Göken Mathias |
28/06/2022 |
09:30 |
10:00 |
See abstract |
The Deformation Behavior of Nanostructured Layered Metallic Composites and Superplastic Zn-Al alloys |
| Plenary Lectures |
|
Preuss Michael |
28/06/2022 |
14:30 |
15:00 |
See abstract |
Strain localisation in engineering alloys – quantifying discrete shear to improve understanding of strain hardening and crack initiation |
| Plenary Lectures |
|
Schwaiger Ruth |
28/06/2022 |
09:00 |
09:30 |
See abstract |
Insights into plasticity by combining nanomechanics, high-resolution characterization and simulation |
| Plenary Lectures |
|
Kirchlechner Christoph |
29/06/2022 |
09:30 |
10:00 |
See abstract |
Can twin boundaries act as dislocation sources? |
| Plenary Lectures |
|
Maier-Kiener Verena |
29/06/2022 |
09:00 |
09:30 |
See abstract |
Local Plasticity of Metals upon Phase Transformations – A Complementary Nanoindentation Study |
| Plenary Lectures |
|
Couzinié Jean-Philippe |
30/06/2022 |
09:30 |
10:00 |
See abstract |
Deformation processes of refractory complex alloys with BCC/B2 microstructure |
| Plenary Lectures |
|
Van Swygenhoven Helena |
30/06/2022 |
09:00 |
09:30 |
See abstract |
Manufacturing alloys in the synchrotron |
| Alain JACQUES † Honorary Symposium |
|
Egan Ashton |
28/06/2022 |
11:50 |
12:05 |
See abstract |
Local Phase Transformation Strengthening in Ni-based Superalloys and Induction of Displacive-Diffusional Phase Formation via Alternative Deformation Pathways |
| Alain JACQUES † Honorary Symposium |
|
Glatzel Uwe |
28/06/2022 |
13:35 |
13:50 |
See abstract |
Quantification of Internal Stresses of Ni-Based Single Crystals at 980°C |
| Alain JACQUES † Honorary Symposium |
|
Guénolé Julien |
28/06/2022 |
13:20 |
13:35 |
See abstract |
On the numerical atomistic characterization of interfacial plasticity |
| Alain JACQUES † Honorary Symposium |
|
Kruml Tomas |
28/06/2022 |
11:15 |
11:35 |
See abstract |
Unified description of short fatigue crack growth |
| Alain JACQUES † Honorary Symposium |
|
Lebedkin Mikhail |
28/06/2022 |
13:05 |
13:20 |
See abstract |
Multi-scale complexity of plastic flow during macroscopically stable and unstable flow |
| Alain JACQUES † Honorary Symposium |
|
Legros Marc |
28/06/2022 |
12:05 |
12:20 |
See abstract |
Low cycle Fatigue of Single Crystalline Silicon between 750 and 900°C |
| Alain JACQUES † Honorary Symposium |
|
Mansoz Benoît |
28/06/2022 |
11:35 |
11:50 |
See abstract |
Effect of chemical composition on yield strength in single crystal Ni-based superalloys at low temperature |
| Alain JACQUES † Honorary Symposium |
|
Neumeier Steffen |
28/06/2022 |
11:10 |
10:30 |
See abstract |
Evolution of the high temperature lattice misfit of highly alloyed single crystalline Ni-base superalloys |
| Alain JACQUES † Honorary Symposium |
|
Parsa Alireza |
28/06/2022 |
15:30 |
15:45 |
See abstract |
Taking a new look at rafting in single crystal superalloys: Exploring the influence of different stress states and the transition towards topological inversion |
| Alain JACQUES † Honorary Symposium |
|
Schenk Thomas |
28/06/2022 |
10:30 |
10:45 |
See abstract |
Simulation of in situ X-Ray Diffraction peaks of single crystal Superalloys |
| Alain JACQUES † Honorary Symposium |
|
Viguier Bernard |
28/06/2022 |
15:10 |
15:30 |
See abstract |
Elastic properties of the α' martensite in Ti-6Al-4V alloy processed by powder bed-laser beam melting |
| Atul CHOKSHI Honorary Symposium |
|
Agrawal Shavi |
27/06/2022 |
11:50 |
12:05 |
See abstract |
Deformation-induced grain growth in ultrafine-grained Ni and Ni-Fe alloy |
| Atul CHOKSHI Honorary Symposium |
|
Bandla Divya |
27/06/2022 |
11:35 |
11:50 |
See abstract |
Creep behavior of concentrated solid solution alloys |
| Atul CHOKSHI Honorary Symposium |
|
Biswas Somjeet |
27/06/2022 |
15:10 |
15:30 |
See abstract |
Twin induced compressive strain hardening behaviour, microstructure and texture evolution in Titanium |
| Atul CHOKSHI Honorary Symposium |
|
Ghosh Pradipta |
27/06/2022 |
17:25 |
17:40 |
See abstract |
Anisotropic strengthening in nanolamellar pearlitic steel |
| Atul CHOKSHI Honorary Symposium |
|
Ghosh Santonu |
27/06/2022 |
16:40 |
16:55 |
See abstract |
High strength steel joints through FSW using PCBN tools |
| Atul CHOKSHI Honorary Symposium |
|
Gupta Richa |
27/06/2022 |
10:30 |
10:45 |
See abstract |
High temperature transverse deformation behavior of directionally solidified Ni-based superalloy |
| Atul CHOKSHI Honorary Symposium |
|
Gurao Nilesh |
27/06/2022 |
15:30 |
15:45 |
See abstract |
Enhanced dynamic and cyclic plasticity in meta-stable Fe50Mn30Co10Cr10 bi-directional TRIP high entropy alloy |
| Atul CHOKSHI Honorary Symposium |
|
Jin Xueze |
27/06/2022 |
12:35 |
13:50 |
See abstract |
Effect of interfacial segregation on the interaction between dislocations and precipitates in Mg alloys |
| Atul CHOKSHI Honorary Symposium |
|
Korla Rajesh |
27/06/2022 |
16:55 |
17:10 |
See abstract |
High-temperature deformation and creep behaviour of Al0.2CoCrFeNiMoo.5 multi-component alloy |
| Atul CHOKSHI Honorary Symposium |
|
Kottada Ravi Sankar |
27/06/2022 |
16:20 |
16:40 |
See abstract |
Deformation behaviour of rare-earth free creep resistant magnesium alloys |
| Atul CHOKSHI Honorary Symposium |
|
Kumar Praveen |
27/06/2022 |
12:05 |
12:20 |
See abstract |
Dislocation Creep at Low Stresses and High Temperature: Harper-Dorn Creep Revisited |
| Atul CHOKSHI Honorary Symposium |
|
Manepalli Prasad |
27/06/2022 |
11:15 |
11:35 |
See abstract |
Microstructure, mechanical behavior and electrochemical response of gradient metallic materials produced by electrodeposition |
| Atul CHOKSHI Honorary Symposium |
|
Mondal Soumita |
27/06/2022 |
12:20 |
12:35 |
See abstract |
Effect of H+ Irradiation on the High-Pressure Torsion Deformed Nb-1wt.%Zr Alloy |
| Atul CHOKSHI Honorary Symposium |
|
Sonawane Dipali |
27/06/2022 |
17:10 |
17:25 |
See abstract |
Insights into the Fracture of Si in Cu-filled Through Silicon Via (Cu-TSV) during Annealing and Post-annealing Natural Ageing |
| Atul CHOKSHI Honorary Symposium |
|
Suwas Satyam |
27/06/2022 |
10:10 |
10:30 |
See abstract |
Additivity of Strengthening Mechanisms in Severe Plastically Deformed Metals and Alloys |
| Atul CHOKSHI Honorary Symposium |
|
Amirthalingam Murugaiyan |
28/06/2022 |
12:20 |
12:35 |
See abstract |
Microstructural evolution and its influence on the plastic deformation of Inconel 625 additively manufactured using arc-wire direct energy deposition method |
| Atul CHOKSHI Honorary Symposium |
|
Bisht Anuj |
28/06/2022 |
12:05 |
12:20 |
See abstract |
Interdiffusion-Induced Forming of AuPd Bimetallic Nanowhiskers |
| Atul CHOKSHI Honorary Symposium |
|
Chaithanya Kumar Karnakanti Naga |
28/06/2022 |
12:35 |
12:50 |
See abstract |
Role of alloying addition and deformation mechanisms on the evolution of texture in α-β titanium alloys |
| Atul CHOKSHI Honorary Symposium |
|
Gérard Céline |
28/06/2022 |
10:10 |
10:30 |
See abstract |
Mechanical behaviour of Ni and Ni3Al free-standing and matrix-embedded metallic nanoparticles at different temperatures |
| Atul CHOKSHI Honorary Symposium |
|
Gopalan Hariprasad |
28/06/2022 |
11:50 |
12:05 |
See abstract |
Microscale fracture toughness of (Hf-Nb-Ta-Zr)C multi-element carbide coatings |
| Atul CHOKSHI Honorary Symposium |
|
Hijazi Faizan |
28/06/2022 |
11:35 |
11:50 |
See abstract |
Material optimisation for creep testing by additively manufactured composite cantilevers |
| Atul CHOKSHI Honorary Symposium |
|
Jayaram Vikram |
28/06/2022 |
11:15 |
11:35 |
See abstract |
Small scale cantilever creep of materials |
| Atul CHOKSHI Honorary Symposium |
|
Kanjilal Anwesha |
28/06/2022 |
10:30 |
10:45 |
See abstract |
Length Scale Dependent Creep Deformation of Dissimilar Metallic Joints: Case Study on Sn-Cu Joints |
| Atul CHOKSHI Honorary Symposium |
|
Padmaganesan Haripria |
28/06/2022 |
16:55 |
17:10 |
See abstract |
Thermal stability and high temperature deformation behavior of microstructurally graded nickel |
| Atul CHOKSHI Honorary Symposium |
|
Pandey Keerti |
28/06/2022 |
16:20 |
16:40 |
See abstract |
On the underlying mechanisms in binary Ni-based nanocrystalline alloys |
| Atul CHOKSHI Honorary Symposium |
|
Rajulapati Koteswararao V |
28/06/2022 |
16:40 |
16:55 |
See abstract |
Strengthening characteristics of multi-phase, multi-principal element alloys probed by indentation methods |
| Atul CHOKSHI Honorary Symposium |
|
Telpande Swanand |
28/06/2022 |
15:30 |
15:45 |
See abstract |
Synergistic effect of external magnetic field on initiation of crack propagation in pre-cracked current-carrying Al foil |
| Atul CHOKSHI Honorary Symposium |
|
Thilly Ludovic |
28/06/2022 |
15:10 |
15:30 |
See abstract |
Revealing the role of microstructure architecture on strength and ductility of Ni microwires by in-situ synchrotron X-Ray diffraction |
| Characterization of deformation processes |
|
Chulist Robert |
27/06/2022 |
16:20 |
16:40 |
See abstract |
Texture evolution near the bonding zones of multilayer hcp and fcc explosively welded metals |
| Characterization of deformation processes |
|
Donohue Jennifer |
27/06/2022 |
15:30 |
15:45 |
See abstract |
In-situ 4D-STEM of the Martensitic Phase Transformation in NiTi |
| Characterization of deformation processes |
|
Fuhr Maximilian |
27/06/2022 |
17:40 |
17:55 |
See abstract |
Deformation mechanisms and structure-property relations of drawn tungsten wires |
| Characterization of deformation processes |
|
Greš Adam |
27/06/2022 |
11:35 |
11:50 |
See abstract |
Acoustic Emission Observations of the Effects of High Temperature fcc Phase Concentration in Pure Polycrystalline Cobalt on its Compressive Behavior |
| Characterization of deformation processes |
|
Jarzębska Anna |
27/06/2022 |
17:10 |
17:25 |
See abstract |
How does alloying addition affect the mechanical stability of bioabsorbable zinc alloys subjected to hydrostatic extrusion? |
| Characterization of deformation processes |
|
Lehnert Robert |
27/06/2022 |
11:50 |
12:05 |
See abstract |
Superelastic behavior of Fe-Mn-Al-Ni single crystals studied by combination of in situ characterization methods |
| Characterization of deformation processes |
|
Maj Michal |
27/06/2022 |
16:40 |
16:55 |
See abstract |
Experimental analysis of material, lattice and plastic rotation during deformation of aluminum multicrystal |
| Characterization of deformation processes |
|
Musial‚ Sandra |
27/06/2022 |
16:55 |
17:10 |
See abstract |
Field analysis of energy conversion during plastic deformation process |
| Characterization of deformation processes |
|
Oyarzabal Ítalo |
27/06/2022 |
10:30 |
10:45 |
See abstract |
(S)TEM characterization of retained austenite in a 3rd generation AHSS medium-Mn steel |
| Characterization of deformation processes |
|
Pelligra Connie |
27/06/2022 |
17:25 |
17:40 |
See abstract |
How to adapt Micro-Speckle Patterning to achieve High Resolution Strain Imaging during In situ Scanning Electron Microscope (SEM) tensile testing |
| Characterization of deformation processes |
|
Sidor Jurij |
27/06/2022 |
15:10 |
15:30 |
See abstract |
Evolution of dislocations and texture in cold-rolled and annealed aluminum alloys |
| Characterization of deformation processes |
|
Texier Damien |
27/06/2022 |
10:10 |
10:30 |
See abstract |
Investigation of sub-grain deformation processes of an In718 Alloy from room temperature to high temperature using High-Resolution Digital Image Correlation |
| Characterization of deformation processes |
|
Weidner Anja |
27/06/2022 |
11:15 |
11:35 |
See abstract |
Studies on the functional degradation of Fe–Mn–Al–Ni shape memory alloy under compression using acoustic emission measurements |
| Characterization of deformation processes |
|
Weidner Timmo |
27/06/2022 |
17:55 |
18:10 |
See abstract |
Evidence of dislocation climb in naturally deformed quartz by electron tomography of dislocations |
| Characterization of deformation processes |
|
Won Jung Yun |
27/06/2022 |
12:05 |
12:20 |
See abstract |
Characterization of interfacial mechanical properties of carbon steel-stainless steel corrosion resistant clad plate |
| Characterization of deformation processes |
|
Cantergiani Elisa |
28/06/2022 |
13:20 |
13:35 |
See abstract |
Influence of Strain Rate Sensitivity on Cube Texture Evolution in Aluminium Alloys |
| Characterization of deformation processes |
|
Dittrich Jan |
28/06/2022 |
10:30 |
10:45 |
See abstract |
In-situ investigation of deformation mechanisms in a textured magnesium alloy AZ31 |
| Characterization of deformation processes |
|
Dobron Patrik |
28/06/2022 |
10:10 |
10:30 |
See abstract |
Analysis of plastic anisotropy of Zircolay-4 combining in-situ and ex-situ techniques |
| Characterization of deformation processes |
|
Holzer Jakub |
28/06/2022 |
12:05 |
12:20 |
See abstract |
On the low temperature deformation of α-iron |
| Characterization of deformation processes |
|
Jaber Hafsa |
28/06/2022 |
11:50 |
12:05 |
See abstract |
Multiscale investigation of the influence of the surface mechanical attrition treatment on the Portevin-Le Chatelier effect in an Al3%Mg alloy |
| Characterization of deformation processes |
|
Jain Vipul |
28/06/2022 |
13:05 |
13:20 |
See abstract |
Study on Goss Texture Development in Electrical Steel |
| Characterization of deformation processes |
|
Sahu Vivek Kumar |
28/06/2022 |
11:35 |
11:50 |
See abstract |
Micro-mechanisms of Anisotropic Deformation in the Presence of Notch in Commercially Pure Titanium: an In situ Study with CPFEM |
| Characterization of deformation processes |
|
Knapek Michal |
30/06/2022 |
16:25 |
16:40 |
See abstract |
Multiscale In-situ Characterization of Deformation Mechanisms in HCP Metals |
| Composite materials |
|
Günay Gakhan |
28/06/2022 |
17:55 |
18:10 |
See abstract |
Investigations of high-temperature mechanical behaviour of a niobium-alumina refractory composite |
| Composite materials |
|
Sekkal Saif Eddine |
28/06/2022 |
17:40 |
17:55 |
See abstract |
Experimental and multi-scale numerical investigation of the mechanical responses for recycled chopped strand woven reinforced thermoplastic composites |
| Composite materials |
|
Šlapáková Michaela |
28/06/2022 |
17:25 |
17:40 |
See abstract |
Deformation of Aluminium-steel Clad Material Prepared by Twin-roll Casting |
| Composite materials |
|
Wang Jian |
28/06/2022 |
17:10 |
17:25 |
See abstract |
High-strength crystal-amorphous Ni-SiOC nanocomposites with superb plastic flow stability |
| Effects of grain boundaries and interfaces |
|
Ding Kuan |
28/06/2022 |
17:10 |
17:25 |
See abstract |
Dislocation and grain boundary interaction in oxides: slip transmission or crack formation? |
| Effects of grain boundaries and interfaces |
|
Hemery Samuel |
28/06/2022 |
16:55 |
17:10 |
See abstract |
Crack initiation at basal twist boundaries in Ti-6Al-4V subjected to cold dwell-fatigue, low-cycle fatigue and high cycle fatigue loadings |
| Effects of grain boundaries and interfaces |
|
Janovska Michaela |
28/06/2022 |
15:30 |
15:45 |
See abstract |
Bonding quality of a cold-sprayed deposit. A laser resonant ultrasound spectroscopy characterization. |
| Effects of grain boundaries and interfaces |
|
Kuglstatter Moritz |
28/06/2022 |
16:20 |
16:40 |
See abstract |
The role of the heterostructured interfaces in ARB processed laminated metallic composites (LMCs) |
| Effects of grain boundaries and interfaces |
|
Legros Marc |
28/06/2022 |
15:10 |
15:30 |
See abstract |
Dislocation-less plasticity in small-grained metals |
| Effects of grain boundaries and interfaces |
|
Liu Chuanlai |
28/06/2022 |
16:40 |
16:55 |
See abstract |
Chemo-mechanical phase-field model for two-sublattice phases: phase precipitation in Al-Zn-Mg-Cu alloys |
| Effects of grain boundaries and interfaces |
|
Miskin Kumar Purshottam |
28/06/2022 |
17:25 |
17:40 |
See abstract |
Molecular dynamics simulations of deformation behaviour of Cu-Al alloys: solute-planar fault interactions |
| Effects of grain boundaries and interfaces |
|
Banis Alexandros |
29/06/2022 |
11:35 |
11:50 |
See abstract |
The effect of κ-carbides on the microstructure and properties of low-density steel |
| Effects of grain boundaries and interfaces |
|
Bizana Gashaw |
29/06/2022 |
13:05 |
13:20 |
See abstract |
Effects of mechanical stresses on grain growth of nanocrystalline FCC metals |
| Effects of grain boundaries and interfaces |
|
Chamma Layal |
29/06/2022 |
10:30 |
10:45 |
See abstract |
Microstructural characterization and micromechanical modelling of internal lengths effects on the plastic behavior of ferritic steels |
| Effects of grain boundaries and interfaces |
|
Kloenne Zachary |
29/06/2022 |
12:05 |
12:20 |
See abstract |
Interface Sliding in Alpha/Beta Titanium Alloys: Activation Mechanisms and Plastic Response |
| Effects of grain boundaries and interfaces |
|
Mukhopadhyay Semanti |
29/06/2022 |
11:50 |
12:05 |
See abstract |
Strain localization under monotonic loading near annealing twin boundaries |
| Effects of grain boundaries and interfaces |
|
Poquillon Dominique |
29/06/2022 |
10:10 |
10:30 |
See abstract |
Effect of thickness of ultra-thin Ti6242S alloy specimens on tensile strength at 450°C in air and argon atmosphere |
| Effects of grain boundaries and interfaces |
|
Richeton Thiebaud |
29/06/2022 |
13:20 |
13:55 |
See abstract |
Study of double-ended dislocation pile-ups in heterogeneous anisotropic elasticity |
| Effects of grain boundaries and interfaces |
|
Verma Sandhya |
29/06/2022 |
11:15 |
11:35 |
See abstract |
Misorientation development near high angle grain boundary and Σ3 boundaries in pure copper and copper-8 wt. % aluminium alloy |
| Elementary deformation mechanisms in engineering materials |
Kumari Geeta |
28/06/2022 |
13:35 |
13:50 |
See abstract |
Investigation of deformation mechanism for bi-modally distributed γ' precipitates in Allvac 718Plus superalloy |
| Elementary deformation mechanisms in engineering materials |
Dannoshita Hiroyuki |
29/06/2022 |
11:50 |
12:05 |
See abstract |
Dislocation structure analysis by neutron diffraction during tensile deformation in 18Ni martensitic steel |
| Elementary deformation mechanisms in engineering materials |
Dhekne Pushkar |
29/06/2022 |
11:35 |
11:50 |
See abstract |
Bi-lamellar microstructure in L-PBF processed Ti-6Al-4V: Heat treatment and quasi-static micro-mechanical deformation behavior |
| Elementary deformation mechanisms in engineering materials |
Giroud Tiphaine |
29/06/2022 |
10:30 |
10:45 |
See abstract |
Anisotropy and variability in tensile properties of Ti-10V-2Fe-3Al metastable β alloy: an interplay between strain localization and competing fracture mechanisms |
| Elementary deformation mechanisms in engineering materials |
Guitton Antoine |
29/06/2022 |
12:20 |
12:35 |
See abstract |
Feature engineering-based approach for capturing fundamental deformation mechanisms of plasticity in β-Ti21S |
| Elementary deformation mechanisms in engineering materials |
Mishra Kushal |
29/06/2022 |
12:05 |
12:20 |
See abstract |
Effect of strain rate on the uni-axial stress-strain behavior of highly cross-linked epoxy resin |
| Elementary deformation mechanisms in engineering materials |
Saimoto Shigeo |
29/06/2022 |
11:15 |
11:35 |
See abstract |
Constitutive Relations and Plastic Work Analyses of Work-Hardening in FCC Metals: Evolution of Stored Work |
| Elementary deformation mechanisms in engineering materials |
Tome Carlos |
29/06/2022 |
10:10 |
10:30 |
See abstract |
A 3-dimensional perspective on twin growth and transmission in HCP metals |
| Elementary deformation mechanisms in engineering materials |
Xie Zhuocheng |
29/06/2022 |
12:35 |
12:50 |
See abstract |
Unveiling the mechanisms of motion of synchro-Shockley dislocations in Laves phases |
| Elementary deformation mechanisms in engineering materials |
Banerjee Dipankar |
30/06/2022 |
10:10 |
10:30 |
See abstract |
Exploring the plasticity of beta phase strengthened by fine scale, multivariant alpha in a titanium alloy |
| Elementary deformation mechanisms in engineering materials |
Caillard Daniel |
30/06/2022 |
15:50 |
16:10 |
See abstract |
Anomalous slip in BCC metals |
| Elementary deformation mechanisms in engineering materials |
Germain Lionel |
30/06/2022 |
11:15 |
11:35 |
See abstract |
Hierarchy of the macrozone features in Ti-6Al-4V alloy investigated using fast Fourier transform-based crystal elasto-viscoplastic simulations |
| Elementary deformation mechanisms in engineering materials |
Iskounen Nadjib |
30/06/2022 |
12:05 |
12:20 |
See abstract |
Multiscale modelling of the impact of hydrogen on mechanical properties of nickel base alloys |
| Elementary deformation mechanisms in engineering materials |
Jain Roopam |
30/06/2022 |
12:50 |
13:05 |
See abstract |
Rate controlling mechanisms in the deformation of additively manufactured SS316 steel |
| Elementary deformation mechanisms in engineering materials |
Jany David |
30/06/2022 |
12:35 |
12:50 |
See abstract |
Temperature dependence of dislocation core configuration in pure Ti |
| Elementary deformation mechanisms in engineering materials |
Ji Gang |
30/06/2022 |
14:35 |
14:50 |
See abstract |
Probing the effect of intragranular premature κ-carbide precipitation on incipient plasticity behavior in austenite-based Fe-Mn-Al-(Cr)-C steels |
| Elementary deformation mechanisms in engineering materials |
Kondi Santharam Suresh |
30/06/2022 |
15:05 |
15:20 |
See abstract |
Role of Ge on the slip activity in Ti-6Al-4V |
| Elementary deformation mechanisms in engineering materials |
Krupp Ulrich |
30/06/2022 |
16:10 |
16:25 |
See abstract |
Single Crystal Analysis of the Bauschinger Effect by Micro-bending Experiments on the Ni-Base Alloy 718 |
| Elementary deformation mechanisms in engineering materials |
Liu Xin |
30/06/2022 |
14:20 |
14:35 |
See abstract |
Prediction for prismatic slip behavior in Mg based on multiple neural network potentials |
| Elementary deformation mechanisms in engineering materials |
Morris John |
30/06/2022 |
11:35 |
11:50 |
See abstract |
Mechanisms of Electroplasticity in alpha-Ti |
| Elementary deformation mechanisms in engineering materials |
Ovri Henry |
30/06/2022 |
12:20 |
12:35 |
See abstract |
On the mechanistic origin of the enhanced strength and ductility in Mg-RE alloys |
| Elementary deformation mechanisms in engineering materials |
Paliwal Deepak |
30/06/2022 |
10:30 |
10:45 |
See abstract |
Improving Strength Ductility Trade-off by Gradient Microstructure in OFHC pure Copper |
| Elementary deformation mechanisms in engineering materials |
Pant Prita |
30/06/2022 |
14:50 |
15:05 |
See abstract |
Solid solution “softening” in copper-aluminum alloys |
| Elementary deformation mechanisms in engineering materials |
Rahbarniazi Masoud |
30/06/2022 |
11:50 |
12:05 |
See abstract |
Solute effects on prismatic slip in Mg alloys |
| Elementary deformation mechanisms in engineering materials |
Rateau Lisa |
30/06/2022 |
16:40 |
16:55 |
See abstract |
Co-free wear-resistant alloys for nuclear applications: design and characterization |
| Elementary deformation mechanisms in engineering materials |
Satyampet Poornachandra |
30/06/2022 |
16:55 |
17:10 |
See abstract |
Twinning induced plasticity during yield point elongation in medium manganese steels |
| Elementary deformation mechanisms in engineering materials |
Schouwenaars Rafael |
30/06/2022 |
14:00 |
14:20 |
See abstract |
A statistical analysis of the interaction between grain boundary and forest hardening |
| Elementary deformation mechanisms in engineering materials |
Winkens Georg |
30/06/2022 |
16:25 |
16:40 |
See abstract |
Solid Solution Hardening in bcc Mo-Ti solid solutions produced via arc-melting |
| Fracture and fatigue |
|
Diak Brad |
29/06/2022 |
11:50 |
12:05 |
See abstract |
High Cycle Fatigue Response of Dissimilar Aluminum Alloy Refill Friction Stir Spot Welds |
| Fracture and fatigue |
|
Fang Xufei |
29/06/2022 |
12:35 |
12:50 |
See abstract |
Room-temperature cyclic loading on ceramic oxides: dislocation density tuning, crack initiation & propagation |
| Fracture and fatigue |
|
Michael Mills |
29/06/2022 |
11:35 |
11:50 |
See abstract |
Fatigue crack initiation and the role of deformation twins in CrCoNi medium-entropy alloy |
| Fracture and fatigue |
|
Poczklán Ladislav |
29/06/2022 |
12:50 |
13:05 |
See abstract |
Comparison of crack growth rate of 316L steel in axial/torsional in-phase and out-of-phase cyclic loading mode |
| Fracture and fatigue |
|
Sierra-Soraluce Andres |
29/06/2022 |
12:05 |
12:20 |
See abstract |
High-cycle fatigue behaviour of Quenching and Partitioning (Q&P) treated stainless steels |
| Fracture and fatigue |
|
Stinville Jean-Charles |
29/06/2022 |
11:15 |
11:35 |
See abstract |
Slip Localization and the Prediction of Fatigue Strength of Polycrystalline Alloys |
| Fracture and fatigue |
|
Wilkinson David |
29/06/2022 |
10:10 |
10:30 |
See abstract |
The Development of Damage-Tolerant Advanced High Strength Steels |
| Fracture and fatigue |
|
Wolke Stefan |
29/06/2022 |
12:20 |
12:35 |
See abstract |
Influence of the surface morphology on the cyclic deformation behavior of a high manganese TWIP steel |
| Fracture and fatigue |
|
Takeshi IWAMOTO |
29/06/2022 |
10:30 |
10:45 |
See abstract |
The evaluation of rate sensitivity in fracture toughness of SUS304 by small punch test |
| Glasses and non-crystalline solids |
|
Kang Sangjun |
28/06/2022 |
16:20 |
16:40 |
See abstract |
Observation of shear transformation zone in metallic glasses |
| Glasses and non-crystalline solids |
|
Mu Xiaoke |
28/06/2022 |
16:55 |
17:10 |
See abstract |
Unveiling the Local Atomic Arrangements in the Shear Band Regions of Metallic Glass |
| High temperature deformation and creep |
|
Agudo Jácome Leonardo |
01/06/2022 |
11:40 |
11:55 |
See abstract |
Creep degradation of the high entropy superalloy AlMo0.5NbTa0.5TiZr |
| High temperature deformation and creep |
|
Kirchmayer Andreas |
01/06/2022 |
10:05 |
10:20 |
See abstract |
Dwell fatigue crack propagation behaviour and the influence of crack oxidation measured by micro cantilever of nickel-base superalloy ATI 718Plus |
| High temperature deformation and creep |
|
A Jeyaraj |
01/07/2022 |
12:05 |
12:20 |
See abstract |
Grain Size Dependency of Continuum Damage Mechanics Approach on Creep Deformation Behaviour of 304HCu SS at 923 K in the Framework of Genetic Algorithm Optimization |
| High temperature deformation and creep |
|
Bezold Andreas |
01/07/2022 |
10:50 |
11:10 |
See abstract |
A novel type of yield strength anomaly in a CoNi-base superalloy |
| High temperature deformation and creep |
|
Haussmann Lukas |
01/07/2022 |
09:50 |
10:05 |
See abstract |
Combinatorial Investigation of the Local Creep Properties on Diffusion Couples by Indentation Creep Testing |
| High temperature deformation and creep |
|
Szűcs Máté |
01/07/2022 |
09:00 |
09:20 |
See abstract |
Prediction of flow stress of Nb40Ti60 alloy in hot deformation |
| High temperature deformation and creep |
|
Thiercelin Léo |
01/07/2022 |
09:20 |
09:35 |
See abstract |
A Viscoplastic model with thermally activated hardening recovery for metallic alloys: application to stainless steel welding |
| High temperature deformation and creep |
|
Wang Hongcai |
01/07/2022 |
11:10 |
11:25 |
See abstract |
TEM Replica Analysis of Particles in a Tempered Martensite Ferritic Steel after Long Term Creep |
| High temperature deformation and creep |
|
Yavuzyegit Berzah |
01/07/2022 |
09:35 |
09:50 |
See abstract |
An in situ study of deformation mechanisms in AZ31 and WE43 Mg alloy at elevated temperatures |
| Integrated computational materials engineering |
Seo Yeon Jo |
28/06/2022 |
15:10 |
15:30 |
See abstract |
An Integrated Computational Modeling of Deformation, Microstructure Evolution and Phase Transformation: Application to Multi-Pass Hot Rolling and Quenching |
| Light weighting of structures |
|
Kumar Subodh |
30/06/2022 |
16:10 |
16:25 |
See abstract |
Asymmetric and reverse rolling of AM30 Mg alloy to improve its tensile properties |
| Light weighting of structures |
|
Schliephake Daniel |
30/06/2022 |
15:50 |
16:10 |
See abstract |
Age-hardening behavior of an Al-Mn-Mg-Sc-Zr alloy subsequent to additive manufacturing and cold working |
| Materials under extreme conditions |
|
Dequiedt Jean-Lin |
28/06/2022 |
17:10 |
17:25 |
See abstract |
Influence of microstructural characteristics on the localization of plastic deformation |
| Materials under extreme conditions |
|
Gray Iii George (rusty) |
28/06/2022 |
16:20 |
16:40 |
See abstract |
Substructure Evolution in a Shock Loaded [100] Aluminum Single Crystal |
| Materials under extreme conditions |
|
Holzer Jakub |
28/06/2022 |
16:40 |
16:55 |
See abstract |
Development and characterization of advanced Fe-10Al-4Cr-4Y2O3 ODS alloy for applications up to 1300 °C |
| Materials under extreme conditions |
|
Paul Henryk |
28/06/2022 |
17:25 |
17:40 |
See abstract |
Structural strengthening and softening mechanisms in the bonding zone of explosively welded sheets |
| Materials under extreme conditions |
|
Schichtel Jacob |
28/06/2022 |
17:40 |
17:55 |
See abstract |
Modeling the coupling of damage and diffusion-driven oxidation in ceramic matrix composites |
| Materials under extreme conditions |
|
Srinivasan Tirunilai Aditya |
28/06/2022 |
16:55 |
17:10 |
See abstract |
Discontinuous deformation of FCC high entropy alloys at temperatures close to 0 K |
| Mechanical behavior associated with phase transformations |
Anderson Peter |
30/06/2022 |
11:15 |
11:35 |
See abstract |
The Effect of Ni Ion Implantation on the Nanoindentation Response of a Ni 50.5at%-Ti 49.5at% Shape Memory Alloy |
| Mechanical behavior associated with phase transformations |
Bapari Sambit |
30/06/2022 |
12:05 |
12:20 |
See abstract |
Open system mechanical behavior of nanoporous palladium-platinum-hydrogen solid solution near critical point |
| Mechanical behavior associated with phase transformations |
Bönisch Matthias |
30/06/2022 |
14:50 |
15:05 |
See abstract |
In-situ characterization of grain-level mechanics in metastable austenitic stainless steel using high-energy X-ray diffraction microscopy |
| Mechanical behavior associated with phase transformations |
Gururajan Mogadalai |
30/06/2022 |
15:05 |
15:20 |
See abstract |
Effect of dislocation networks on precipitate morphologies: phase field modelling with atom probe tomography validation |
| Mechanical behavior associated with phase transformations |
Jagtap Piyush |
30/06/2022 |
10:10 |
10:30 |
See abstract |
Understanding phase-change phenomenon in undoped and Nitrogen doped GeTe thin films using curvature measurements |
| Mechanical behavior associated with phase transformations |
Morel Xavier |
30/06/2022 |
13:05 |
13:20 |
See abstract |
A micromechanical model for the austenite-martensite transformation in hot stamping of automotive steel sheets |
| Mechanical behavior associated with phase transformations |
Nair Jitin |
30/06/2022 |
14:35 |
14:50 |
See abstract |
Elastic Inhomogeneity Effects on Spinodal Decomposition in Ternary Alloys |
| Mechanical behavior associated with phase transformations |
Piotrowski Boris |
30/06/2022 |
11:35 |
11:50 |
See abstract |
Simulation of CuAlBe tensile test using SMA constitutive law and comparison with in-situ synchrotron data |
| Mechanical behavior associated with phase transformations |
Preisler Dalibor |
30/06/2022 |
14:00 |
14:20 |
See abstract |
Achieving stress-induced martensitic transformation in metastable beta-Ti alloys with high oxygen content |
| Mechanical behavior associated with phase transformations |
Škraban Tomáš |
30/06/2022 |
11:50 |
12:05 |
See abstract |
Theoretical description of martensite transformation in beta-Ti alloys |
| Mechanical behavior associated with phase transformations |
Stoklasova Pavla |
30/06/2022 |
14:20 |
14:35 |
See abstract |
Elastic Characterization of Beta-Ti15Mo by Transient Grating Spectroscopy |
| Mechanical behavior associated with phase transformations |
Sun Qian |
30/06/2022 |
13:20 |
13:35 |
See abstract |
A study on shape recovery in Fe-Mn-Si shape memory alloy under cyclic thermo-compressive loading |
| Mechanical behavior associated with phase transformations |
Varma R. Arjun |
30/06/2022 |
10:30 |
10:45 |
See abstract |
Phase transformation assisted by dislocation-solute interactions |
| Mechanical behavior associated with phase transformations |
Wójcik Anna |
30/06/2022 |
13:35 |
13:50 |
See abstract |
Giant magnetic field-induced strains in textured Ni-Mn-Ga and Ni-Mn-Ga-Fe melt-spun ribbons |
| Mechanical behaviour of high entropy alloys |
|
Daramola Ayobami |
30/06/2022 |
10:30 |
10:45 |
See abstract |
Atomistic Investigation of Elementary Dislocation Properties Influencing mechanical behaviour of fcc CrFeMnNi alloy and FeNi10Cr20 alloy |
| Mechanical behaviour of high entropy alloys |
|
Eggeler Gunther |
30/06/2022 |
10:10 |
10:30 |
See abstract |
Alloy chemistry and size effect: A micromechanical study of fcc high entropy alloys |
| Mechanical behaviour of high entropy alloys |
|
Esfandiarpour Amin |
30/06/2022 |
11:35 |
11:50 |
See abstract |
chemical disorder and stacking fault width dependence of edge dislocation yielding in face centered cubic random high entropy alloys |
| Mechanical behaviour of high entropy alloys |
|
George Easo |
30/06/2022 |
11:15 |
11:35 |
See abstract |
Dual-function nanoprecipitates enhance the strength and ductility of a medium-entropy alloy |
| Mechanical behaviour of high entropy alloys |
|
Jha Saumya |
30/06/2022 |
12:50 |
13:05 |
See abstract |
Improvement in mechanical properties of ternary MEA by interrupted annealing and thermal cycling |
| Mechanical behaviour of high entropy alloys |
|
Kubilay Ekin |
30/06/2022 |
15:05 |
15:20 |
See abstract |
Theory of twin strengthening in fcc high entropy alloys |
| Mechanical behaviour of high entropy alloys |
|
Laplanche Guillaume |
30/06/2022 |
12:05 |
12:20 |
See abstract |
Deformation twinning in polycrystalline medium- and high-entropy alloys |
| Mechanical behaviour of high entropy alloys |
|
Laube Stephan |
30/06/2022 |
14:20 |
14:35 |
See abstract |
Order phenomena and mechanical properties in refractory high entropy alloys |
| Mechanical behaviour of high entropy alloys |
|
Lebedkin Mikhail |
30/06/2022 |
14:35 |
14:50 |
See abstract |
Mesoscopic-Scale Complexity of Plastic Flow in a Al0.3CoCrFeNi High-Entropy Alloy |
| Mechanical behaviour of high entropy alloys |
|
Lu Kaiju |
30/06/2022 |
12:35 |
12:50 |
See abstract |
Low-cycle fatigue behavior and deformation mechanisms of a dual-phase Al0.5CoCrFeMnNi high-entropy alloy |
| Mechanical behaviour of high entropy alloys |
|
Lu Yemao |
30/06/2022 |
15:50 |
16:10 |
See abstract |
The mechanical properties and microstructure evolution of nano structured CoCrFeMnNiC2 high entropy alloy after annealing |
| Mechanical behaviour of high entropy alloys |
|
Nag Shankha |
30/06/2022 |
11:50 |
12:05 |
See abstract |
Deformation behaviour of (CoCrFeMn)1-xNix cantor alloy |
| Mechanical behaviour of high entropy alloys |
|
Novelli Marc |
30/06/2022 |
14:00 |
14:20 |
See abstract |
Hydrogen embrittlement of a CrMnFeCoNi high-entropy alloy treated by ultrasonic shot peening |
| Mechanical behaviour of high entropy alloys |
|
Rao You |
30/06/2022 |
16:10 |
16:25 |
See abstract |
Theory-guided Design of High-strength, Ductile, Single-phase BCC High Entropy Alloys |
| Mechanical behaviour of high entropy alloys |
|
Sboui Bassem |
30/06/2022 |
12:20 |
12:35 |
See abstract |
Elastic model of BCC high entropy alloys. |
| Mechanical behaviour of high entropy alloys |
|
Sourav Ayush |
30/06/2022 |
16:40 |
16:55 |
See abstract |
Superposition of strengthening mechanisms in hot forged AlxCoCrFeNi high entropy alloys |
| Mechanical behaviour of high entropy alloys |
|
Tayari Tomáš |
30/06/2022 |
14:50 |
15:45 |
See abstract |
Unusual plastic instabilities in entropy alloys at elevated temperatures |
| Mechanical behaviour of high entropy alloys |
|
Traversier Mathieu |
30/06/2022 |
16:25 |
16:40 |
See abstract |
Mechanical improvement of a Co-free high entropy alloy with nitrogen addition |
| Mechanistic foundations for multiscale modeling |
Fischer Tim |
29/06/2022 |
10:30 |
10:45 |
See abstract |
Tension and compression dwell fatigue behaviour of austenitic cast iron D5S: A crystal plasticity study |
| Mechanistic foundations for multiscale modeling |
Liu Chuanlai |
29/06/2022 |
11:15 |
11:35 |
See abstract |
Finite-strain crystal plasticity-phase field modeling of twin, dislocation and grain boundary interactions in hexagonal materials |
| Mechanistic foundations for multiscale modeling |
Macchi Juan |
29/06/2022 |
11:50 |
12:05 |
See abstract |
Modelling of the tensile behavior of low-carbon martensitic steels based on experimentally determined microstructural distributions |
| Mechanistic foundations for multiscale modeling |
Ryu Ill |
29/06/2022 |
10:10 |
10:30 |
See abstract |
Defects Dynamics Element Models for Nanoindentation: Effect of Indenter Radius, Initial Density and Crystal Orientation on Incipient Plasticity |
| Mechanistic foundations for multiscale modeling |
Sahoo Sudeep Kumar |
29/06/2022 |
13:20 |
13:35 |
See abstract |
Assessing the importance of Taylor Factor in the context of viscoplastic self-consistent modelling |
| Mechanistic foundations for multiscale modeling |
Soriano Bardon Lucas |
29/06/2022 |
11:35 |
11:50 |
See abstract |
Influence of welding on the ductility of a Fe-Nb-V-C microalloyed steel |
| Mechanistic foundations for multiscale modeling |
Starikov Sergei |
29/06/2022 |
13:05 |
13:20 |
See abstract |
Macroscopic characteristics of plastic deformation in bcc metals described through dislocation mobility properties |
| Mechanistic foundations for multiscale modeling |
Tsekpuia Eyram |
29/06/2022 |
12:05 |
12:20 |
See abstract |
Numerical implementation of a micromechanical elastoviscoplastic homogenization model for austenitic-ferritic stainless steels |
| Micro- and nano-scale mechanical testing |
|
Bajtošová Lucia |
30/06/2022 |
14:35 |
14:50 |
See abstract |
Mechanical properties of nanocrystalline thin films |
| Micro- and nano-scale mechanical testing |
|
Borasi Luciano |
30/06/2022 |
13:20 |
13:35 |
See abstract |
The effect of size and temperature on the deformation of cast silver microwires |
| Micro- and nano-scale mechanical testing |
|
Edwards Thomas |
30/06/2022 |
13:05 |
13:20 |
See abstract |
In situ 3D mapping of local stress and crystal defect structures during micro-mechanical testing by n3D-XRD-CT |
| Micro- and nano-scale mechanical testing |
|
Gao Puyi |
30/06/2022 |
10:30 |
10:45 |
See abstract |
Development of a crack arrest toughness measurement techniques using small specimens to evaluate the fracture behavior in the ductile-brittle transition region of “ferritic†steel. |
| Micro- and nano-scale mechanical testing |
|
Hernandez Escobar David |
30/06/2022 |
13:35 |
13:50 |
See abstract |
Micromechanics of oxide inclusions in ferrous alloys: interfacial strength |
| Micro- and nano-scale mechanical testing |
|
Kalacska Szilvia |
30/06/2022 |
11:15 |
11:35 |
See abstract |
Anomalous High Strain Rate Compressive Behaviour of Additively Manufactured Copper Micropillars |
| Micro- and nano-scale mechanical testing |
|
Kiener Daniel |
30/06/2022 |
14:00 |
14:20 |
See abstract |
Interface toughness affected by mode mixity and interface chemistry |
| Micro- and nano-scale mechanical testing |
|
Knapek Michal |
30/06/2022 |
17:10 |
17:25 |
See abstract |
Acoustic Signatures of Dislocation Avalanches During Microsample Deformation |
| Micro- and nano-scale mechanical testing |
|
Kovács Tünde |
30/06/2022 |
11:35 |
11:50 |
See abstract |
Experimental Study of the Ultrasonic Welding Effected Crack Propagation |
| Micro- and nano-scale mechanical testing |
|
Murugan Siva Prasad |
30/06/2022 |
15:05 |
15:20 |
See abstract |
Unravelling hydrogen effects on elasticity and plasticity mechanisms in nickel single crystal using nanoindentation |
| Micro- and nano-scale mechanical testing |
|
Sarkar Prakash |
30/06/2022 |
11:50 |
12:05 |
See abstract |
First Principles Analysis of Materials Response of Amorphous Glassy Polymers to Nanoindentation |
| Micro- and nano-scale mechanical testing |
|
Slagter Alejandra |
30/06/2022 |
14:20 |
14:35 |
See abstract |
Micromechanics of oxide inclusions in ferrous alloys: inclusion strength |
| Micro- and nano-scale mechanical testing |
|
Verma Sandhya |
30/06/2022 |
14:50 |
15:05 |
See abstract |
Novel method for correction of thermal drift in nanoindentation experiments |
| Micro- and nano-scale mechanical testing |
|
Wagner Ruben |
30/06/2022 |
12:05 |
12:20 |
See abstract |
Importance of combined cleaning filter systems for removal of non-metallic inclusions in 42CrMo4 steel |
| Micro- and nano-scale mechanical testing |
|
Wheeler Jeffrey M. |
30/06/2022 |
16:10 |
16:25 |
See abstract |
Mechanical Microscopy Using Correlative Nanoindentation and Analytical Electron Microscopy |
| Micro- and nano-scale mechanical testing |
|
Zhang Zaoli |
30/06/2022 |
10:10 |
10:30 |
See abstract |
Atomic-scale understanding of deformation process triggered by nanoindentation |
| Micro- and nano-scale mechanical testing |
|
Zimmerman Jonathan |
30/06/2022 |
15:50 |
16:10 |
See abstract |
Size and Shape Effects on the Strength of Platinum Nanoparticles |
| Strength of additive-manufactured materials |
|
Anthony Rollett |
01/07/2022 |
09:00 |
09:20 |
See abstract |
Processing-Microstructure-Mechanical Property Relationships in Additively Manufactured Titanium |
| Strength of additive-manufactured materials |
|
Assi Mariam |
01/07/2022 |
09:35 |
09:50 |
See abstract |
Alloy Design for Additive Manufacturing |
| Strength of additive-manufactured materials |
|
Biswal Romali |
01/07/2022 |
11:40 |
11:55 |
See abstract |
Wire+arc additive manufacturing of Invar with pre-alloyed and in-situ mixed Fe and Ni wires |
| Strength of additive-manufactured materials |
|
Gonzalez David |
01/07/2022 |
10:05 |
11:10 |
See abstract |
Microstructure and mechanical characteristics in a wirearc additively manufactured component of low carbon steel and Inconel 625 |
| Strength of additive-manufactured materials |
|
Burkhardt Christina |
01/07/2022 |
09:20 |
09:35 |
See abstract |
Additive manufacturing of high-alloy austenitic steels with equiaxed fine-grained microstructure |
| Strength of additive-manufactured materials |
|
Ediae Joseph |
01/07/2022 |
09:50 |
10:05 |
See abstract |
INTERFACIAL PROPERTIES OF 3D PRINTED LAYERED CONCRETE |
| Strength of additive-manufactured materials |
|
Leonard Aeriel |
01/07/2022 |
11:10 |
11:25 |
See abstract |
Quantifying Damage Evolution During In-situ Loading of Additively Manufactured 316L Stainless Steel Using High Energy X-rays |
| Strength of additive-manufactured materials |
|
Man Jiří |
01/07/2022 |
11:25 |
11:40 |
See abstract |
Stability of 316L stainless steels manufactured by selective laser melting against martensite formation during fatigue |
| Strength of additive-manufactured materials |
|
Van Petegem Steven |
01/07/2022 |
10:50 |
11:10 |
See abstract |
Tuning the mechanical properties of Ti-6Al-4V-3Fe by in situ alloying during laser powder bed fusion |
| Strength of biomedical and bio-inspired materials |
Drozdenko Daria |
28/06/2022 |
17:25 |
17:40 |
See abstract |
Influence of microalloying on microstructure and mechanical properties of rapidly solidified ribbon-consolidated Mg-based alloys |
| Strength of biomedical and bio-inspired materials |
Kubásek Jiří |
28/06/2022 |
17:10 |
17:25 |
See abstract |
Improving the strength of Zn-Mg-Ag bioabsorbable alloys by adjustment of fine-grained microstructure using powder metallurgy techniques. |
| Strength of biomedical and bio-inspired materials |
Renk Oliver |
28/06/2022 |
17:40 |
17:55 |
See abstract |
Mitigating the detrimental effects of galvanic corrosion in high strength Mg composites by nanoscale architecture design |
| Symposium on SPD Materials |
|
Abbasi Zahra |
27/06/2022 |
16:40 |
16:55 |
See abstract |
Hydrogen Storage Properties of Mg-Zn-Gd-Y-Nd Alloys As-Processed by SPD |
| Symposium on SPD Materials |
|
Edalati Kaveh |
27/06/2022 |
15:10 |
15:30 |
See abstract |
High-pressure torsion and the origin of life |
| Symposium on SPD Materials |
|
Field David |
27/06/2022 |
11:15 |
11:35 |
See abstract |
Heterogeneous Structures by Linear Corrugated Pressing |
| Symposium on SPD Materials |
|
Heinzelmeier Adrien |
27/06/2022 |
16:55 |
17:10 |
See abstract |
Microstructural and mechanical characterizations of Mg-based nanocomposites with MAX phases or MXenes after severe plastic deformation treatments |
| Symposium on SPD Materials |
|
Jacob Kevin |
27/06/2022 |
12:05 |
12:20 |
See abstract |
Effect of HPT processing on precipitation and mechanical behaviour of Maraging steel 250 |
| Symposium on SPD Materials |
|
Kapp Marlene |
27/06/2022 |
11:35 |
11:50 |
See abstract |
Ductility and toughness of a 7 GPa pearlitic steel |
| Symposium on SPD Materials |
|
Kim Hyoung Seop |
27/06/2022 |
10:30 |
10:45 |
See abstract |
2000% superplasticity in a nanostructured high-entropy alloy processed by high-pressure torsion |
| Symposium on SPD Materials |
|
Nugmanov Dayan |
27/06/2022 |
12:20 |
12:35 |
See abstract |
Enhanced uniform elongation in the SPD-processed Cu-Fe hybrid materials with helical architecture |
| Symposium on SPD Materials |
|
Sauvage Xavier |
27/06/2022 |
16:20 |
16:40 |
See abstract |
Mechanical and electrical properties of a nanostructured Al-Ca alloy |
| Symposium on SPD Materials |
|
Sepsi Máté |
27/06/2022 |
15:30 |
15:45 |
See abstract |
Metal bonding by Friction-Assisted Lateral Extrusion Process (FALEP) at room temperature |
| Symposium on SPD Materials |
|
Tripathi Nikhil |
27/06/2022 |
11:50 |
12:05 |
See abstract |
Effect of Die Design on Microstructure and Mechanical Properties of Pure Copper |
| Symposium on SPD Materials |
|
Wurster Stefan |
27/06/2022 |
12:35 |
12:50 |
See abstract |
FeCr Composites Processed by Multiple High-Pressure Torsion Steps |
| Symposium on SPD Materials |
|
Zehetbauer Michael |
27/06/2022 |
10:10 |
10:30 |
See abstract |
Bulk Nanocrystalline Soft Magnetic Fe-Si-X Alloys Achieved Through Severe Plastic Deformation |
| Symposium on SPD Materials |
|
Antoni Monika |
28/06/2022 |
11:35 |
11:50 |
See abstract |
SPD-induced crystallization in two Fe-based metallic glasses |
| Symposium on SPD Materials |
|
Biriaie Seyyed Saeid |
28/06/2022 |
12:05 |
12:20 |
See abstract |
Room Temperature Bonding of Copper and Aluminum in High-Pressure Tube Twisting |
| Symposium on SPD Materials |
|
Chouhan Devesh Kumar |
28/06/2022 |
10:30 |
10:45 |
See abstract |
Obtaining high strength-ductility combination in titanium by ambient temperature multi axial plane-strain forging and rolling |
| Symposium on SPD Materials |
|
Lowe Terry |
28/06/2022 |
10:10 |
10:30 |
See abstract |
High Pressure Compressive Shear of Non-Fully Dense Materials |
| Symposium on SPD Materials |
|
N Kumaran Surya |
28/06/2022 |
11:50 |
12:05 |
See abstract |
Behavior during severe plastic deformation of the Al6(CoFeMnNi) high entropy alloy: experiments and crystal plasticity simulations |
| Symposium on SPD Materials |
|
Pippan Reinhard |
28/06/2022 |
11:15 |
11:35 |
See abstract |
Mechanics of materials Hardening by annealing in nanocrystalline PtRu: A further grain size dependent issue |
| Symposium on SPD Materials |
|
Šašek Stanislav |
28/06/2022 |
12:20 |
12:35 |
See abstract |
Fine-grained magnesium alloy designed for aviation applications |
| Tamas UNGAR Honorary Symposium |
|
Balogh Levente |
27/06/2022 |
15:30 |
15:45 |
See abstract |
Quantifying the Recovery of Cold-Worked Zr-2.5Nb using X-ray Diffraction Line Profile Analysis |
| Tamas UNGAR Honorary Symposium |
|
Borbely Andras |
27/06/2022 |
17:10 |
17:25 |
See abstract |
The modified Williamson and Hall plot, revisited |
| Tamas UNGAR Honorary Symposium |
|
Brown Don |
27/06/2022 |
11:15 |
11:35 |
See abstract |
Recovery Of Irradiation Induced Dislocations In HT-9 Steel Coupons Removed From A Nuclear Reactor Fuel Duct. |
| Tamas UNGAR Honorary Symposium |
|
Cordier Patrick |
27/06/2022 |
16:40 |
16:55 |
See abstract |
Relative strengths of bridgmanite (MgSiO3) and periclase (MgO) in the conditions of the lower mantle |
| Tamas UNGAR Honorary Symposium |
|
Farkas Gergely |
27/06/2022 |
12:05 |
12:20 |
See abstract |
Line profile analysis and rocking curve evaluation of 3D diffraction data |
| Tamas UNGAR Honorary Symposium |
|
Ivanisenko Yulia |
27/06/2022 |
13:20 |
13:35 |
See abstract |
Nanocrystalline high entropy Cr5CoFeNiMn alloys with carbon additions and their mechanical properties |
| Tamas UNGAR Honorary Symposium |
|
Kim Hyoung Seop |
27/06/2022 |
15:10 |
15:30 |
See abstract |
Dislocation density-based finite element analysis of large strain deformation |
| Tamas UNGAR Honorary Symposium |
|
Koc Omer |
27/06/2022 |
16:55 |
17:10 |
See abstract |
The effect of proton irradiation on the microstructural evolution and mechanical properties of Zirconium alloys |
| Tamas UNGAR Honorary Symposium |
|
Lipcsei Sandor |
27/06/2022 |
13:35 |
13:50 |
See abstract |
Ex- and in-situ investigation of dislocation cell formation during uniaxial compression of copper single crystal |
| Tamas UNGAR Honorary Symposium |
|
Pantleon Wolfgang |
27/06/2022 |
16:20 |
16:40 |
See abstract |
Curious rise in peak profile asymmetry during unloading in cyclic deformation |
| Tamas UNGAR Honorary Symposium |
|
Preuss Michael |
27/06/2022 |
17:25 |
17:40 |
See abstract |
Using diffraction line profile analysis to understand irradiation-induced growth in nuclear fuel cladding |
| Tamas UNGAR Honorary Symposium |
|
Ribarik Gabor |
27/06/2022 |
11:50 |
12:05 |
See abstract |
Investigation of crystal defects by molecular dynamics simulations |
| Tamas UNGAR Honorary Symposium |
|
Skrotzki Werner |
27/06/2022 |
10:10 |
10:30 |
See abstract |
Phase transformation in CrMnFeCoNi high-entropy alloy induced by high pressure torsion |
| Tamas UNGAR Honorary Symposium |
|
Szabó Peter |
27/06/2022 |
13:05 |
13:20 |
See abstract |
Multiaxial forging of low carbon – low alloy ferritic steel |
| Tamas UNGAR Honorary Symposium |
|
Ungar Tamas |
27/06/2022 |
10:30 |
10:45 |
See abstract |
Partial dislocation densities and character in different slip modes from X-ray powder diffraction patterns |
| Tamas UNGAR Honorary Symposium |
|
Zoltan Hegedues |
27/06/2022 |
11:35 |
11:50 |
See abstract |
High-resolution diffraction at the Swedish high-energy materials science beamline P21.2 at PETRA III |
| Poster Session |
|
Ablam Massa |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Simulation of in situ X-ray diffraction peaks of single crystal superalloys |
| Poster Session |
|
Ahmed Anwar |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Ultralow temperature superplasticity in ultrafine-grained Al alloys |
| Poster Session |
|
Azzayani Hamza |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Asymptotic Numerical Algorithm for thin shell instabilities |
| Poster Session |
|
Basu Soudip |
28/06/2022 |
18:10 |
20:30 |
See abstract |
MICROSTRUCTURAL ENGINEERING IN DUAL PHASE STEELS –PARTITIONING ASPECTS AND CORRELATION TO FORMABILITY |
| Poster Session |
|
Bathini Lavakumar |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Compositional gradient nanocrystalline Ni-W coatings by electrodeposition for superior wear resistance |
| Poster Session |
|
Bednarczyk Wiktor |
28/06/2022 |
18:10 |
20:30 |
See abstract |
First attempt to obtain high-strength ductile biodegradable Zn alloys by rapid solidification and subsequent high-pressure torsion |
| Poster Session |
|
Bedoya Vallejo Daniel |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Modeling of thermomechanical behavior of Al3003 with unified constitutive models |
| Poster Session |
|
Bindu Gutta |
28/06/2022 |
18:10 |
20:30 |
See abstract |
High-temperature mechanical response of Aluminum- In-situ Polymer Derived Ceramic Composite prepared by Friction Stir Processing |
| Poster Session |
|
Bodnarova Lucie |
28/06/2022 |
18:10 |
20:30 |
See abstract |
In-situ characterization of growth of isothermal ω-phase in metastable β-Ti alloy TIMETAL LCB |
| Poster Session |
|
Chaithanya Kumar Karnakanti Naga |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Correlations between Microstructure and Fracture Morphologies in Ti-6Al-4V |
| Poster Session |
|
Chamakura Jaji Naveena |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Non-linear reversible behaviour of metal alloys at low stresses |
| Poster Session |
|
Chatterjee Ritam |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Crystal plasticity–Phase–Field Modeling of Dynamic Recrystallization in Dual Phase Titanium Alloys |
| Poster Session |
|
Dash Barun Bharadwaj |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Fatigue Strength Behavior and Creep Fatigue Interaction in the Bimodal L12 (γ') Strengthened Nickel-Based Alloy 718Plus |
| Poster Session |
|
Nilesh Prakash Gurao |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Understanding the deformation behaviour of single and multi-phase alloys using crystal plasticity finite element method |
| Poster Session |
|
Dickes Daniel |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Enhancing wear relevant surface properties of Ti6Al4V and TiZrNbHfTa through thermal oxidation |
| Poster Session |
|
Dixit Shubhashis |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Influence of microstructure on the room and high temperature quasi-static and dynamic deformation behavior of Ti-6Al-4V alloy |
| Poster Session |
|
Dutta Shubhendu |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Effect of grain size on dwell fatigue behaviour of Ti-5Al-2.5Sn ELI alloy |
| Poster Session |
|
Fang Xufei |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Room-temperature deformation processes of SrTiO3 unmasked by nanoindentation and chemical etching |
| Poster Session |
|
Fang Xufei |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Unlocking room-temperature superplasticity in ceramic oxide by dislocation engineering |
| Poster Session |
|
Prita Pant |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Effect of stacking fault energy on the dislocation interaction mechanisms in Cu and Cu-Al alloys: a molecular dynamics study |
| Poster Session |
|
Gawande Anjali |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Evaluation of the role of aging on mechanical properties of a Ni-Based Superalloy using Nanoindentation |
| Poster Session |
|
Gorle Revathi |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Densification of B4C composite through reactive spark plasma sintering using mechanically activated Ti-B reactive mixture as a sintering aid |
| Poster Session |
|
Hatta Muhammad Fakhry |
28/06/2022 |
18:10 |
20:30 |
See abstract |
In-situ Studies of The Strain Localization in Polycrystals by Electron Microscopy Techniques |
| Poster Session |
|
I Ranjith Kumar |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Role of microstructure on mechanical anisotropy in additively manufactured AlSi10Mg alloy |
| Poster Session |
|
Jacob Kevin |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Fracture behaviour of HPT processed Maraging steel 250 |
| Poster Session |
|
Jagtap Piyush |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Whisker growth under controlled driving force |
| Poster Session |
|
Jain Roopam |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Dislocation cell structure induced long range internal stresses and strain hardening modelling of direct metal laser sintered SS316 |
| Poster Session |
|
Jullien Malo |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Nanoindentation mapping to probe local mechanical properties of oxidation-affected region in Inconel 718. |
| Poster Session |
|
Kalacska Szilvia |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Micromechanical study of precipitation-hardened dual phase high entropy alloy |
| Poster Session |
|
Karnati Abhinav Kumar |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Serrated flow in carbide strengthened cobalt base superalloy |
| Poster Session |
|
Khadivianazar Saba |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Influence of Twin Boundaries on the Mechanical Behavior of fcc-Metallic Nanowires Subjected to Bending |
| Poster Session |
|
Kharouji Houssam |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Atomic-scale features of grain boundaries in metals: from the atomistic to the continuum |
| Poster Session |
|
Köbrich Manuel |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Unveiling the Origin of Segregation-assisted Hardening in CoCrNi-Alloys with Varying Mo Content Using Correlative TEM/APT Microscopy |
| Poster Session |
|
Koga Norimitsu |
28/06/2022 |
18:10 |
20:30 |
See abstract |
High-temperature hardness in various steels measured by small ball rebound hardness test |
| Poster Session |
|
Kondi Santharam Suresh |
28/06/2022 |
18:10 |
20:30 |
See abstract |
The surface textures of Ni-Cu alloys |
| Poster Session |
|
Kotla Sairam |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Effect of molybdenum on high temperature flow behavior of Fe30Mn5Al1C-xMo lightweight austenitic steels |
| Poster Session |
|
Kozlik Jiri |
28/06/2022 |
18:10 |
20:30 |
See abstract |
EBSD study of deformation induced twinning and transformation of Ti-(23-29)Nb-7Zr-(0.5-0.8)O alloy |
| Poster Session |
|
Králík Rostislav |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Mechanical properties of Al-Cu-Li based alloys after ageing |
| Poster Session |
|
Křivská Barbora |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Influence of Sc on microstructure and mechanical properties of Al-Li-based alloys |
| Poster Session |
|
Kumar Govind |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Development of novel in-situ polymer-derived low carbon steel metal matrix composite using friction stir processing |
| Poster Session |
|
Kumar Saurabh |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Heterogeneities in Martensite Through Controlled Deformation in Austenite |
| Poster Session |
|
Lale Mathieu |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Mechanical properties assessment of additive manufactured Ti64 using Small Punch Test |
| Poster Session |
|
Laszlo Toth |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Experimental Investigations to Increase the Plastic Mould Tool Life |
| Poster Session |
|
Maj Lukasz |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Tribological behavior of titania coatings produced by micro-arc oxidation method on hydrostatically extruded titanium |
| Poster Session |
|
Manda Sanjay |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Internal Friction of Steel: A Microstructural Perspective |
| Poster Session |
|
Mania Izabela |
28/06/2022 |
18:10 |
20:30 |
See abstract |
On twinning and shear banding in copper single crystals of {110}<112>, {112}<111> and {123}<634> initial orientations deformed at high strain rates |
| Poster Session |
|
Maziarz Wojciech |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Mechanically and magnetically induced strain in additive manufactured NiMnGa-based shape memory alloys |
| Poster Session |
|
Musza Alexandra |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Study of anodic film's surface and hardness on A356 aluminium alloys |
| Poster Session |
|
Nasiri Samaneh |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Effects of elasticity and dislocation core structure on the interaction of dislocations with embedded CNTs in aluminium: An atomistic simulation study |
| Poster Session |
|
Nyikes Zoltán |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Explosion effect on the mechanical properties of the investigated stainless steel |
| Poster Session |
|
Ochoa-Avendaño Jhon |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Nucleation texture prediction of IF Steel based on the Advanced-Lamel Crystal Plasticity code |
| Poster Session |
|
Oláh Ferenc |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Investigation of the hydrostatic and plastic zones of hardness measurement using finite element simulation |
| Poster Session |
|
P Shruti |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Effect of cold work on creep deformation behaviour of austenitic stainless steel 304HCu |
| Poster Session |
|
Paranjape Sanika |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Polymer derived ceramic reinforced magnesium-based metal matrix composite |
| Poster Session |
|
Patra Achintya |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Investigation of the unique staircase type strain hardening behavior in a medium Mn steel |
| Poster Session |
|
Pelligra Connie |
28/06/2022 |
18:10 |
20:30 |
See abstract |
The Role of Transformation Induced Plasticity on Damage Development in a Third Generation prototype Medium Mn Advanced High Strength Steel |
| Poster Session |
|
Pontillo Antonio |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Effect of the stress state and strain rate on deformation-induced transformation in medium-Mn steels |
| Poster Session |
|
Kumaran Surya |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Effect of a sequence of layers on microstructure and mechanical properties of ultra-fine grained AA2024/AA5038 laminated composites produced by accumulative roll bonding (ARB) |
| Poster Session |
|
Anna Fraczkiewiczc |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Novel Co-free multi principal element alloys (MPEAs) for nuclear applications: computational design and experimental evaluation |
| Poster Session |
|
Ranjan Shreshtha |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Response of shock wave deformation on the evolution of microstructure and texture in magnesium |
| Poster Session |
|
Reddy Tejanath |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Micromechanical response of commercially pure titanium Insights from experiments and simulations |
| Poster Session |
|
Ribarik Gabor |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Application of artificial intelligence algorithms for phase analysis |
| Poster Session |
|
Rosenkranz Laura |
28/06/2022 |
18:10 |
20:30 |
See abstract |
The tensile strength of hexagonal closest-packed rare earth high-, medium- and low-entropy alloys |
| Poster Session |
|
Růžek Roman |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Experimental analysis of thermoplastic composite stiffened panel under compression |
| Poster Session |
|
S Abhijith |
28/06/2022 |
18:10 |
20:30 |
See abstract |
High-temperature deformation behavior of Nb-stabilized austenitic stainless steels |
| Poster Session |
|
S Sabari Rajan |
28/06/2022 |
18:10 |
20:30 |
See abstract |
High temperature deformation behavior of additively manufactured Inconel 718 |
| Poster Session |
|
Sahu Vivek Kumar |
28/06/2022 |
18:10 |
20:30 |
See abstract |
The Role of Multivariant Twinning on J-integral Value in Commercially Pure Titanium |
| Poster Session |
|
Sarkar Prakash |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Investigation of Recovery Phenomenon at Room Temperature of a Glassy SU-8 Thermoset |
| Poster Session |
|
Satyampet Poornachandra |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Strain path effect on martensitic transformation in medium Mn steels. |
| Poster Session |
|
Singh Vivek |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Understanding the strengthening by annealing in cold rolled NiCrCo medium entropy alloy |
| Poster Session |
|
Sobti Apoorv |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Improving mechanical properties of nano-bainitic steels |
| Poster Session |
|
Straumal Boris |
28/06/2022 |
18:10 |
20:30 |
See abstract |
High pressure torsion of Cu–Ag alloys at room temperature and 77 K |
| Poster Session |
|
Swetha Singam |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Effect of high pressure torsion on microstructure evolution and mechanical behavior of Al-Mg-Sc-Zr alloy |
| Poster Session |
|
Tavakkolisaiej Vahid |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Precipitation role in strengthening and improved conductivity of HPTE-processed Al-Mg-Si alloy |
| Poster Session |
|
Texier Damien |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Multi-modal analyses of nanoindentation properties at the sub-grain level in Ni-based and Ti-based polycrystalline alloys |
| Poster Session |
|
Tournay Mélaine |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Microstructural and textural evolution during cold unidirectional rolling (UR) and cold cross-rolling (CR) of near alpha titanium alloy Ti-3Al-2.5V |
| Poster Session |
|
Umasankar Chintada |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Evolution of microstructure and its influence on stretch-flange-formability in thermo-mechanically controlled processed (TMCP) quenched and partitioned (Q&P) steel |
| Poster Session |
|
Watroba Maria |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Experimental measurements of critical resolved shear stress in pure Zn and Zn-Ag alloys using micropillars compression |
| Poster Session |
|
Weidner Anja |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Very high cycle fatigue behaviour of additively manufactured TiAl 48-2-2 at 700°C |
| Poster Session |
|
Wu Xian |
28/06/2022 |
18:10 |
20:30 |
See abstract |
Mechanical behavior of carbon-bonded alumina foam materials based on a lactose-tannin binder system at high temperatures |
| Poster Session |
|
Yang Yitong |
28/06/2022 |
18:10 |
20:30 |
See abstract |
In-situ investigation on cyclic bending deformation of oligo-crystalline 316LVM steel for coronary stent application with EBSD |
Loading...