|
|
Day |
Start |
Finish |
Abstract Title |
Link to abstract |
TOPIC |
| A Jeyaraj |
01/07/2022 |
12:05 |
12:20 |
Grain Size Dependency of Continuum Damage Mechanics Approach on Creep Deformation Behaviour of 304HCu SS at 923 K in the Framework of Genetic Algorithm Optimization |
See abstract |
High temperature deformation and creep |
| Abbasi Zahra |
27/06/2022 |
16:40 |
16:55 |
Hydrogen Storage Properties of Mg-Zn-Gd-Y-Nd Alloys As-Processed by SPD |
See abstract |
Symposium on SPD Materials |
| Ablam Massa |
28/06/2022 |
18:10 |
20:30 |
Simulation of in situ X-ray diffraction peaks of single crystal superalloys |
See abstract |
Poster Session |
| Agrawal Shavi |
27/06/2022 |
11:50 |
12:05 |
Deformation-induced grain growth in ultrafine-grained Ni and Ni-Fe alloy |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Agudo Jácome Leonardo |
01/06/2022 |
11:40 |
11:55 |
Creep degradation of the high entropy superalloy AlMo0.5NbTa0.5TiZr |
See abstract |
High temperature deformation and creep |
| Ahmed Anwar |
28/06/2022 |
18:10 |
20:30 |
Ultralow temperature superplasticity in ultrafine-grained Al alloys |
See abstract |
Poster Session |
| Amirthalingam Murugaiyan |
28/06/2022 |
12:20 |
12:35 |
Microstructural evolution and its influence on the plastic deformation of Inconel 625 additively manufactured using arc-wire direct energy deposition method |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Anderson Peter |
30/06/2022 |
11:15 |
11:35 |
The Effect of Ni Ion Implantation on the Nanoindentation Response of a Ni 50.5at%-Ti 49.5at% Shape Memory Alloy |
See abstract |
Mechanical behavior associated with phase transformations |
| Anthony Rollett |
01/07/2022 |
09:00 |
09:20 |
Processing-Microstructure-Mechanical Property Relationships in Additively Manufactured Titanium |
See abstract |
Strength of additive-manufactured materials |
| Antoni Monika |
28/06/2022 |
11:35 |
11:50 |
SPD-induced crystallization in two Fe-based metallic glasses |
See abstract |
Symposium on SPD Materials |
| Assi Mariam |
01/07/2022 |
09:35 |
09:50 |
Alloy Design for Additive Manufacturing |
See abstract |
Strength of additive-manufactured materials |
| Azzayani Hamza |
28/06/2022 |
18:10 |
20:30 |
Asymptotic Numerical Algorithm for thin shell instabilities |
See abstract |
Poster Session |
| Bajtošová Lucia |
30/06/2022 |
14:35 |
14:50 |
Mechanical properties of nanocrystalline thin films |
See abstract |
Micro- and nano-scale mechanical testing |
| Balogh Levente |
27/06/2022 |
15:30 |
15:45 |
Quantifying the Recovery of Cold-Worked Zr-2.5Nb using X-ray Diffraction Line Profile Analysis |
See abstract |
Tamas UNGAR Honorary Symposium |
| Bandla Divya |
27/06/2022 |
11:35 |
11:50 |
Creep behavior of concentrated solid solution alloys |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Banerjee Dipankar |
30/06/2022 |
10:10 |
10:30 |
Exploring the plasticity of beta phase strengthened by fine scale, multivariant alpha in a titanium alloy |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Banis Alexandros |
29/06/2022 |
11:35 |
11:50 |
The effect of κ-carbides on the microstructure and properties of low-density steel |
See abstract |
Effects of grain boundaries and interfaces |
| Bapari Sambit |
30/06/2022 |
12:05 |
12:20 |
Open system mechanical behavior of nanoporous palladium-platinum-hydrogen solid solution near critical point |
See abstract |
Mechanical behavior associated with phase transformations |
| Basu Soudip |
28/06/2022 |
18:10 |
20:30 |
MICROSTRUCTURAL ENGINEERING IN DUAL PHASE STEELS –PARTITIONING ASPECTS AND CORRELATION TO FORMABILITY |
See abstract |
Poster Session |
| Bathini Lavakumar |
28/06/2022 |
18:10 |
20:30 |
Compositional gradient nanocrystalline Ni-W coatings by electrodeposition for superior wear resistance |
See abstract |
Poster Session |
| Bednarczyk Wiktor |
28/06/2022 |
18:10 |
20:30 |
First attempt to obtain high-strength ductile biodegradable Zn alloys by rapid solidification and subsequent high-pressure torsion |
See abstract |
Poster Session |
| Bedoya Vallejo Daniel |
28/06/2022 |
18:10 |
20:30 |
Modeling of thermomechanical behavior of Al3003 with unified constitutive models |
See abstract |
Poster Session |
| Bezold Andreas |
01/07/2022 |
10:50 |
11:10 |
A novel type of yield strength anomaly in a CoNi-base superalloy |
See abstract |
High temperature deformation and creep |
| Bindu Gutta |
28/06/2022 |
18:10 |
20:30 |
High-temperature mechanical response of Aluminum- In-situ Polymer Derived Ceramic Composite prepared by Friction Stir Processing |
See abstract |
Poster Session |
| Biriaie Seyyed Saeid |
28/06/2022 |
12:05 |
12:20 |
Room Temperature Bonding of Copper and Aluminum in High-Pressure Tube Twisting |
See abstract |
Symposium on SPD Materials |
| Bisht Anuj |
28/06/2022 |
12:05 |
12:20 |
Interdiffusion-Induced Forming of AuPd Bimetallic Nanowhiskers |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Biswal Romali |
01/07/2022 |
11:40 |
11:55 |
Wire+arc additive manufacturing of Invar with pre-alloyed and in-situ mixed Fe and Ni wires |
See abstract |
Strength of additive-manufactured materials |
| Biswas Somjeet |
27/06/2022 |
15:10 |
15:30 |
Twin induced compressive strain hardening behaviour, microstructure and texture evolution in Titanium |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Bitzek |
28/06/2022 |
16:20 |
16:40 |
The Origin of Deformation-Induced Topological Anisotropy in Silica Glass |
See abstract |
Glasses and non-crystalline solids |
| Bizana Gashaw |
29/06/2022 |
13:05 |
13:20 |
Effects of mechanical stresses on grain growth of nanocrystalline FCC metals |
See abstract |
Effects of grain boundaries and interfaces |
| Bodnarova Lucie |
28/06/2022 |
18:10 |
20:30 |
In-situ characterization of growth of isothermal ω-phase in metastable β-Ti alloy TIMETAL LCB |
See abstract |
Poster Session |
| Bönisch Matthias |
30/06/2022 |
14:50 |
15:05 |
In-situ characterization of grain-level mechanics in metastable austenitic stainless steel using high-energy X-ray diffraction microscopy |
See abstract |
Mechanical behavior associated with phase transformations |
| Borasi Luciano |
30/06/2022 |
13:20 |
13:35 |
The effect of size and temperature on the deformation of cast silver microwires |
See abstract |
Micro- and nano-scale mechanical testing |
| Borbely Andras |
27/06/2022 |
17:10 |
17:25 |
The modified Williamson and Hall plot, revisited |
See abstract |
Tamas UNGAR Honorary Symposium |
| Brown Don |
27/06/2022 |
11:15 |
11:35 |
Recovery Of Irradiation Induced Dislocations In HT-9 Steel Coupons Removed From A Nuclear Reactor Fuel Duct. |
See abstract |
Tamas UNGAR Honorary Symposium |
| Burkhardt Christina |
01/07/2022 |
09:20 |
09:35 |
Additive manufacturing of high-alloy austenitic steels with equiaxed fine-grained microstructure |
See abstract |
Strength of additive-manufactured materials |
| Caillard Daniel |
30/06/2022 |
15:50 |
16:10 |
Anomalous slip in BCC metals |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Cantergiani Elisa |
28/06/2022 |
13:20 |
13:35 |
Influence of Strain Rate Sensitivity on Cube Texture Evolution in Aluminium Alloys |
See abstract |
Characterization of deformation processes |
| Chaithanya Kumar Karnakanti Naga |
28/06/2022 |
12:35 |
12:50 |
Role of alloying addition and deformation mechanisms on the evolution of texture in α-β titanium alloys |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Chaithanya Kumar Karnakanti Naga |
28/06/2022 |
18:10 |
20:30 |
Correlations between Microstructure and Fracture Morphologies in Ti-6Al-4V |
See abstract |
Poster Session |
| Chamakura Jaji Naveena |
28/06/2022 |
18:10 |
20:30 |
Non-linear reversible behaviour of metal alloys at low stresses |
See abstract |
Poster Session |
| Chamma Layal |
29/06/2022 |
10:30 |
10:45 |
Microstructural characterization and micromechanical modelling of internal lengths effects on the plastic behavior of ferritic steels |
See abstract |
Effects of grain boundaries and interfaces |
| Chatterjee Ritam |
28/06/2022 |
18:10 |
20:30 |
Crystal plasticity–Phase–Field Modeling of Dynamic Recrystallization in Dual Phase Titanium Alloys |
See abstract |
Poster Session |
| Chouhan Devesh Kumar |
28/06/2022 |
10:30 |
10:45 |
Obtaining high strength-ductility combination in titanium by ambient temperature multi axial plane-strain forging and rolling |
See abstract |
Symposium on SPD Materials |
| Chulist Robert |
27/06/2022 |
16:20 |
16:40 |
Texture evolution near the bonding zones of multilayer hcp and fcc explosively welded metals |
See abstract |
Characterization of deformation processes |
| Cordier Patrick |
27/06/2022 |
16:40 |
16:55 |
Relative strengths of bridgmanite (MgSiO3) and periclase (MgO) in the conditions of the lower mantle |
See abstract |
Tamas UNGAR Honorary Symposium |
| Couzinié Jean-Philippe |
30/06/2022 |
09:30 |
10:00 |
Deformation processes of refractory complex alloys with BCC/B2 microstructure |
See abstract |
Plenary Lectures |
| Dannoshita Hiroyuki |
29/06/2022 |
11:50 |
12:05 |
Dislocation structure analysis by neutron diffraction during tensile deformation in 18Ni martensitic steel |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Daramola Ayobami |
30/06/2022 |
10:30 |
10:45 |
Atomistic Investigation of Elementary Dislocation Properties Influencing mechanical behaviour of fcc CrFeMnNi alloy and FeNi10Cr20 alloy |
See abstract |
Mechanical behaviour of high entropy alloys |
| Dash Barun Bharadwaj |
28/06/2022 |
18:10 |
20:30 |
Fatigue Strength Behavior and Creep Fatigue Interaction in the Bimodal L12 (γ') Strengthened Nickel-Based Alloy 718Plus |
See abstract |
Poster Session |
| Nilesh Prakash Gurao |
28/06/2022 |
18:10 |
20:30 |
Understanding the deformation behaviour of single and multi-phase alloys using crystal plasticity finite element method |
See abstract |
Poster Session |
| Dequiedt Jean-Lin |
28/06/2022 |
17:10 |
17:25 |
Influence of microstructural characteristics on the localization of plastic deformation |
See abstract |
Materials under extreme conditions |
| Dhekne Pushkar |
29/06/2022 |
11:35 |
11:50 |
Bi-lamellar microstructure in L-PBF processed Ti-6Al-4V: Heat treatment and quasi-static micro-mechanical deformation behavior |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Diak Brad |
29/06/2022 |
11:50 |
12:05 |
High Cycle Fatigue Response of Dissimilar Aluminum Alloy Refill Friction Stir Spot Welds |
See abstract |
Fracture and fatigue |
| Dickes Daniel |
28/06/2022 |
18:10 |
20:30 |
Enhancing wear relevant surface properties of Ti6Al4V and TiZrNbHfTa through thermal oxidation |
See abstract |
Poster Session |
| Ding Kuan |
28/06/2022 |
17:10 |
17:25 |
Dislocation and grain boundary interaction in oxides: slip transmission or crack formation? |
See abstract |
Effects of grain boundaries and interfaces |
| Dittrich Jan |
28/06/2022 |
10:30 |
10:45 |
In-situ investigation of deformation mechanisms in a textured magnesium alloy AZ31 |
See abstract |
Characterization of deformation processes |
| Dixit Shubhashis |
28/06/2022 |
18:10 |
20:30 |
Influence of microstructure on the room and high temperature quasi-static and dynamic deformation behavior of Ti-6Al-4V alloy |
See abstract |
Poster Session |
| Dobron Patrik |
28/06/2022 |
10:10 |
10:30 |
Analysis of plastic anisotropy of Zircolay-4 combining in-situ and ex-situ techniques |
See abstract |
Characterization of deformation processes |
| Donohue Jennifer |
27/06/2022 |
15:30 |
15:45 |
In-situ 4D-STEM of the Martensitic Phase Transformation in NiTi |
See abstract |
Characterization of deformation processes |
| Drozdenko Daria |
28/06/2022 |
17:25 |
17:40 |
Influence of microalloying on microstructure and mechanical properties of rapidly solidified ribbon-consolidated Mg-based alloys |
See abstract |
Strength of biomedical and bio-inspired materials |
| Dutta Shubhendu |
28/06/2022 |
18:10 |
20:30 |
Effect of grain size on dwell fatigue behaviour of Ti-5Al-2.5Sn ELI alloy |
See abstract |
Poster Session |
| Edalati Kaveh |
27/06/2022 |
15:10 |
15:30 |
High-pressure torsion and the origin of life |
See abstract |
Symposium on SPD Materials |
| Ediae Joseph |
01/07/2022 |
09:50 |
10:05 |
INTERFACIAL PROPERTIES OF 3D PRINTED LAYERED CONCRETE |
See abstract |
Strength of additive-manufactured materials |
| Edwards Thomas |
30/06/2022 |
13:05 |
13:20 |
In situ 3D mapping of local stress and crystal defect structures during micro-mechanical testing by n3D-XRD-CT |
See abstract |
Micro- and nano-scale mechanical testing |
| Egan Ashton |
28/06/2022 |
11:50 |
12:05 |
Local Phase Transformation Strengthening in Ni-based Superalloys and Induction of Displacive-Diffusional Phase Formation via Alternative Deformation Pathways |
See abstract |
Alain JACQUES † Honorary Symposium |
| Eggeler Gunther |
30/06/2022 |
10:10 |
10:30 |
Alloy chemistry and size effect: A micromechanical study of fcc high entropy alloys |
See abstract |
Mechanical behaviour of high entropy alloys |
| Esfandiarpour Amin |
30/06/2022 |
11:35 |
11:50 |
chemical disorder and stacking fault width dependence of edge dislocation yielding in face centered cubic random high entropy alloys |
See abstract |
Mechanical behaviour of high entropy alloys |
| Fang Xufei |
28/06/2022 |
18:10 |
20:30 |
Room-temperature deformation processes of SrTiO3 unmasked by nanoindentation and chemical etching |
See abstract |
Poster Session |
| Fang Xufei |
29/06/2022 |
12:35 |
12:50 |
Room-temperature cyclic loading on ceramic oxides: dislocation density tuning, crack initiation & propagation |
See abstract |
Fracture and fatigue |
| Fang Xufei |
28/06/2022 |
18:10 |
20:30 |
Unlocking room-temperature superplasticity in ceramic oxide by dislocation engineering |
See abstract |
Poster Session |
| Farkas Gergely |
27/06/2022 |
12:05 |
12:20 |
Line profile analysis and rocking curve evaluation of 3D diffraction data |
See abstract |
Tamas UNGAR Honorary Symposium |
| Field David |
27/06/2022 |
11:15 |
11:35 |
Heterogeneous Structures by Linear Corrugated Pressing |
See abstract |
Symposium on SPD Materials |
| Fischer Tim |
29/06/2022 |
10:30 |
10:45 |
Tension and compression dwell fatigue behaviour of austenitic cast iron D5S: A crystal plasticity study |
See abstract |
Mechanistic foundations for multiscale modeling |
| Fuhr Maximilian |
27/06/2022 |
17:40 |
17:55 |
Deformation mechanisms and structure-property relations of drawn tungsten wires |
See abstract |
Characterization of deformation processes |
| Prita Pant |
28/06/2022 |
18:10 |
20:30 |
Effect of stacking fault energy on the dislocation interaction mechanisms in Cu and Cu-Al alloys: a molecular dynamics study |
See abstract |
Poster Session |
| Gao Puyi |
30/06/2022 |
10:30 |
10:45 |
Development of a crack arrest toughness measurement techniques using small specimens to evaluate the fracture behavior in the ductile-brittle transition region of “ferritic†steel. |
See abstract |
Micro- and nano-scale mechanical testing |
| Gawande Anjali |
28/06/2022 |
18:10 |
20:30 |
Evaluation of the role of aging on mechanical properties of a Ni-Based Superalloy using Nanoindentation |
See abstract |
Poster Session |
| George Easo |
30/06/2022 |
11:15 |
11:35 |
Dual-function nanoprecipitates enhance the strength and ductility of a medium-entropy alloy |
See abstract |
Mechanical behaviour of high entropy alloys |
| Gérard Céline |
28/06/2022 |
10:10 |
10:30 |
Mechanical behaviour of Ni and Ni3Al free-standing and matrix-embedded metallic nanoparticles at different temperatures |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Germain Lionel |
30/06/2022 |
11:15 |
11:35 |
Hierarchy of the macrozone features in Ti-6Al-4V alloy investigated using fast Fourier transform-based crystal elasto-viscoplastic simulations |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Ghazisaeidi Maryam |
28/06/2022 |
14:00 |
14:30 |
Stacking fault energy in concentrated alloys |
See abstract |
Plenary Lectures |
| Ghosh Pradipta |
27/06/2022 |
17:25 |
17:40 |
Anisotropic strengthening in nanolamellar pearlitic steel |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Ghosh Santonu |
27/06/2022 |
16:40 |
16:55 |
High strength steel joints through FSW using PCBN tools |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Giroud Tiphaine |
29/06/2022 |
10:30 |
10:45 |
Anisotropy and variability in tensile properties of Ti-10V-2Fe-3Al metastable β alloy: an interplay between strain localization and competing fracture mechanisms |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Glatzel Uwe |
28/06/2022 |
13:35 |
13:50 |
Quantification of Internal Stresses of Ni-Based Single Crystals at 980°C |
See abstract |
Alain JACQUES † Honorary Symposium |
| Göken Mathias |
28/06/2022 |
09:30 |
10:00 |
The Deformation Behavior of Nanostructured Layered Metallic Composites and Superplastic Zn-Al alloys |
See abstract |
Plenary Lectures |
| Gopalan Hariprasad |
28/06/2022 |
11:50 |
12:05 |
Microscale fracture toughness of (Hf-Nb-Ta-Zr)C multi-element carbide coatings |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Gorle Revathi |
28/06/2022 |
18:10 |
20:30 |
Densification of B4C composite through reactive spark plasma sintering using mechanically activated Ti-B reactive mixture as a sintering aid |
See abstract |
Poster Session |
| Gray Iii George (rusty) |
28/06/2022 |
16:20 |
16:40 |
Substructure Evolution in a Shock Loaded [100] Aluminum Single Crystal |
See abstract |
Materials under extreme conditions |
| Greš Adam |
27/06/2022 |
11:35 |
11:50 |
Acoustic Emission Observations of the Effects of High Temperature fcc Phase Concentration in Pure Polycrystalline Cobalt on its Compressive Behavior |
See abstract |
Characterization of deformation processes |
| Guénolé Julien |
28/06/2022 |
13:20 |
13:35 |
On the numerical atomistic characterization of interfacial plasticity |
See abstract |
Alain JACQUES † Honorary Symposium |
| Guitton Antoine |
29/06/2022 |
12:20 |
12:35 |
Feature engineering-based approach for capturing fundamental deformation mechanisms of plasticity in β-Ti21S |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Günay Gakhan |
28/06/2022 |
17:55 |
18:10 |
Investigations of high-temperature mechanical behaviour of a niobium-alumina refractory composite |
See abstract |
Composite materials |
| Gupta Richa |
27/06/2022 |
10:30 |
10:45 |
High temperature transverse deformation behavior of directionally solidified Ni-based superalloy |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Gurao Nilesh |
27/06/2022 |
15:30 |
15:45 |
Enhanced dynamic and cyclic plasticity in meta-stable Fe50Mn30Co10Cr10 bi-directional TRIP high entropy alloy |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Gururajan Mogadalai |
30/06/2022 |
15:05 |
15:20 |
Effect of dislocation networks on precipitate morphologies: phase field modelling with atom probe tomography validation |
See abstract |
Mechanical behavior associated with phase transformations |
| Hatta Muhammad Fakhry |
28/06/2022 |
18:10 |
20:30 |
In-situ Studies of The Strain Localization in Polycrystals by Electron Microscopy Techniques |
See abstract |
Poster Session |
| Haussmann Lukas |
01/07/2022 |
09:50 |
10:05 |
Combinatorial Investigation of the Local Creep Properties on Diffusion Couples by Indentation Creep Testing |
See abstract |
High temperature deformation and creep |
| Heinzelmeier Adrien |
27/06/2022 |
16:55 |
17:10 |
Microstructural and mechanical characterizations of Mg-based nanocomposites with MAX phases or MXenes after severe plastic deformation treatments |
See abstract |
Symposium on SPD Materials |
| Hemery Samuel |
28/06/2022 |
16:55 |
17:10 |
Crack initiation at basal twist boundaries in Ti-6Al-4V subjected to cold dwell-fatigue, low-cycle fatigue and high cycle fatigue loadings |
See abstract |
Effects of grain boundaries and interfaces |
| Hernandez Escobar David |
30/06/2022 |
13:35 |
13:50 |
Micromechanics of oxide inclusions in ferrous alloys: interfacial strength |
See abstract |
Micro- and nano-scale mechanical testing |
| Hijazi Faizan |
28/06/2022 |
11:35 |
11:50 |
Material optimisation for creep testing by additively manufactured composite cantilevers |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Holzer Jakub |
28/06/2022 |
12:05 |
12:20 |
On the low temperature deformation of α-iron |
See abstract |
Characterization of deformation processes |
| Holzer Jakub |
28/06/2022 |
16:40 |
16:55 |
Development and characterization of advanced Fe-10Al-4Cr-4Y2O3 ODS alloy for applications up to 1300 °C |
See abstract |
Materials under extreme conditions |
| Hunter Abigail |
27/06/2022 |
14:00 |
14:30 |
Mesoscale Investigation of Dislocation-Grain Boundary Interactions in Metals and Alloys |
See abstract |
Plenary Lectures |
| I Ranjith Kumar |
28/06/2022 |
18:10 |
20:30 |
Role of microstructure on mechanical anisotropy in additively manufactured AlSi10Mg alloy |
See abstract |
Poster Session |
| Iskounen Nadjib |
30/06/2022 |
12:05 |
12:20 |
Multiscale modelling of the impact of hydrogen on mechanical properties of nickel base alloys |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Ivanisenko Yulia |
27/06/2022 |
13:20 |
13:35 |
Nanocrystalline high entropy Cr5CoFeNiMn alloys with carbon additions and their mechanical properties |
See abstract |
Tamas UNGAR Honorary Symposium |
| Jaber Hafsa |
28/06/2022 |
11:50 |
12:05 |
Multiscale investigation of the influence of the surface mechanical attrition treatment on the Portevin-Le Chatelier effect in an Al3%Mg alloy |
See abstract |
Characterization of deformation processes |
| Jacob Kevin |
28/06/2022 |
18:10 |
20:30 |
Fracture behaviour of HPT processed Maraging steel 250 |
See abstract |
Poster Session |
| Jacob Kevin |
27/06/2022 |
12:05 |
12:20 |
Effect of HPT processing on precipitation and mechanical behaviour of Maraging steel 250 |
See abstract |
Symposium on SPD Materials |
| Jagtap Piyush |
28/06/2022 |
18:10 |
20:30 |
Whisker growth under controlled driving force |
See abstract |
Poster Session |
| Jagtap Piyush |
30/06/2022 |
10:10 |
10:30 |
Understanding phase-change phenomenon in undoped and Nitrogen doped GeTe thin films using curvature measurements |
See abstract |
Mechanical behavior associated with phase transformations |
| Jain Roopam |
28/06/2022 |
18:10 |
20:30 |
Dislocation cell structure induced long range internal stresses and strain hardening modelling of direct metal laser sintered SS316 |
See abstract |
Poster Session |
| Jain Roopam |
30/06/2022 |
12:50 |
13:05 |
Rate controlling mechanisms in the deformation of additively manufactured SS316 steel |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Jain Vipul |
28/06/2022 |
13:05 |
13:20 |
Study on Goss Texture Development in Electrical Steel |
See abstract |
Characterization of deformation processes |
| Janovska Michaela |
28/06/2022 |
15:30 |
15:45 |
Bonding quality of a cold-sprayed deposit. A laser resonant ultrasound spectroscopy characterization. |
See abstract |
Effects of grain boundaries and interfaces |
| Jany David |
30/06/2022 |
12:35 |
12:50 |
Temperature dependence of dislocation core configuration in pure Ti |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Jarzębska Anna |
27/06/2022 |
17:10 |
17:25 |
How does alloying addition affect the mechanical stability of bioabsorbable zinc alloys subjected to hydrostatic extrusion? |
See abstract |
Characterization of deformation processes |
| Jayaram Vikram |
28/06/2022 |
11:15 |
11:35 |
Small scale cantilever creep of materials |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Jha Saumya |
30/06/2022 |
12:50 |
13:05 |
Improvement in mechanical properties of ternary MEA by interrupted annealing and thermal cycling |
See abstract |
Mechanical behaviour of high entropy alloys |
| Ji Gang |
30/06/2022 |
14:35 |
14:50 |
Probing the effect of intragranular premature κ-carbide precipitation on incipient plasticity behavior in austenite-based Fe-Mn-Al-(Cr)-C steels |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Jin Xueze |
27/06/2022 |
12:35 |
13:50 |
Effect of interfacial segregation on the interaction between dislocations and precipitates in Mg alloys |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Jullien Malo |
28/06/2022 |
18:10 |
20:30 |
Nanoindentation mapping to probe local mechanical properties of oxidation-affected region in Inconel 718. |
See abstract |
Poster Session |
| Kailas Satish |
27/06/2022 |
14:30 |
15:00 |
High-Strength High-Ductility Polymer Derived Ceramic Metal Matrix Composites |
See abstract |
Plenary Lectures |
| Kalacska Szilvia |
28/06/2022 |
18:10 |
20:30 |
Micromechanical study of precipitation-hardened dual phase high entropy alloy |
See abstract |
Poster Session |
| Kalacska Szilvia |
30/06/2022 |
11:15 |
11:35 |
Anomalous High Strain Rate Compressive Behaviour of Additively Manufactured Copper Micropillars |
See abstract |
Micro- and nano-scale mechanical testing |
| Kang Sangjun |
28/06/2022 |
16:20 |
16:40 |
Observation of shear transformation zone in metallic glasses |
See abstract |
Glasses and non-crystalline solids |
| Kanjilal Anwesha |
28/06/2022 |
10:30 |
10:45 |
Length Scale Dependent Creep Deformation of Dissimilar Metallic Joints: Case Study on Sn-Cu Joints |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Kapp Marlene |
27/06/2022 |
11:35 |
11:50 |
Ductility and toughness of a 7 GPa pearlitic steel |
See abstract |
Symposium on SPD Materials |
| Karnati Abhinav Kumar |
28/06/2022 |
18:10 |
20:30 |
Serrated flow in carbide strengthened cobalt base superalloy |
See abstract |
Poster Session |
| Khadivianazar Saba |
28/06/2022 |
18:10 |
20:30 |
Influence of Twin Boundaries on the Mechanical Behavior of fcc-Metallic Nanowires Subjected to Bending |
See abstract |
Poster Session |
| Kharouji Houssam |
28/06/2022 |
18:10 |
20:30 |
Atomic-scale features of grain boundaries in metals: from the atomistic to the continuum |
See abstract |
Poster Session |
| Kiener Daniel |
30/06/2022 |
14:00 |
14:20 |
Interface toughness affected by mode mixity and interface chemistry |
See abstract |
Micro- and nano-scale mechanical testing |
| Kim Hyoung Seop |
27/06/2022 |
10:30 |
10:45 |
2000% superplasticity in a nanostructured high-entropy alloy processed by high-pressure torsion |
See abstract |
Symposium on SPD Materials |
| Kim Hyoung Seop |
27/06/2022 |
15:10 |
15:30 |
Dislocation density-based finite element analysis of large strain deformation |
See abstract |
Tamas UNGAR Honorary Symposium |
| Kirchlechner Christoph |
29/06/2022 |
09:30 |
10:00 |
Can twin boundaries act as dislocation sources? |
See abstract |
Plenary Lectures |
| Kirchmayer Andreas |
01/06/2022 |
10:05 |
10:20 |
Dwell fatigue crack propagation behaviour and the influence of crack oxidation measured by micro cantilever of nickel-base superalloy ATI 718Plus |
See abstract |
High temperature deformation and creep |
| Kloenne Zachary |
29/06/2022 |
12:05 |
12:20 |
Interface Sliding in Alpha/Beta Titanium Alloys: Activation Mechanisms and Plastic Response |
See abstract |
Effects of grain boundaries and interfaces |
| Knapek Michal |
30/06/2022 |
16:25 |
16:40 |
Multiscale In-situ Characterization of Deformation Mechanisms in HCP Metals |
See abstract |
Characterization of deformation processes |
| Knapek Michal |
30/06/2022 |
17:10 |
17:25 |
Acoustic Signatures of Dislocation Avalanches During Microsample Deformation |
See abstract |
Micro- and nano-scale mechanical testing |
| Köbrich Manuel |
28/06/2022 |
18:10 |
20:30 |
Unveiling the Origin of Segregation-assisted Hardening in CoCrNi-Alloys with Varying Mo Content Using Correlative TEM/APT Microscopy |
See abstract |
Poster Session |
| Koc Omer |
27/06/2022 |
16:55 |
17:10 |
The effect of proton irradiation on the microstructural evolution and mechanical properties of Zirconium alloys |
See abstract |
Tamas UNGAR Honorary Symposium |
| Koga Norimitsu |
28/06/2022 |
18:10 |
20:30 |
High-temperature hardness in various steels measured by small ball rebound hardness test |
See abstract |
Poster Session |
| Kondi Santharam Suresh |
28/06/2022 |
18:10 |
20:30 |
The surface textures of Ni-Cu alloys |
See abstract |
Poster Session |
| Kondi Santharam Suresh |
30/06/2022 |
15:05 |
15:20 |
Role of Ge on the slip activity in Ti-6Al-4V |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Korla Rajesh |
27/06/2022 |
16:55 |
17:10 |
High-temperature deformation and creep behaviour of Al0.2CoCrFeNiMoo.5 multi-component alloy |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Kotla Sairam |
28/06/2022 |
18:10 |
20:30 |
Effect of molybdenum on high temperature flow behavior of Fe30Mn5Al1C-xMo lightweight austenitic steels |
See abstract |
Poster Session |
| Kottada Ravi Sankar |
27/06/2022 |
16:20 |
16:40 |
Deformation behaviour of rare-earth free creep resistant magnesium alloys |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Kovács Tünde |
30/06/2022 |
11:35 |
11:50 |
Experimental Study of the Ultrasonic Welding Effected Crack Propagation |
See abstract |
Micro- and nano-scale mechanical testing |
| Kozlik Jiri |
28/06/2022 |
18:10 |
20:30 |
EBSD study of deformation induced twinning and transformation of Ti-(23-29)Nb-7Zr-(0.5-0.8)O alloy |
See abstract |
Poster Session |
| Králík Rostislav |
28/06/2022 |
18:10 |
20:30 |
Mechanical properties of Al-Cu-Li based alloys after ageing |
See abstract |
Poster Session |
| Křivská Barbora |
28/06/2022 |
18:10 |
20:30 |
Influence of Sc on microstructure and mechanical properties of Al-Li-based alloys |
See abstract |
Poster Session |
| Kruml Tomas |
28/06/2022 |
11:15 |
11:35 |
Unified description of short fatigue crack growth |
See abstract |
Alain JACQUES † Honorary Symposium |
| Krupp Ulrich |
30/06/2022 |
16:10 |
16:25 |
Single Crystal Analysis of the Bauschinger Effect by Micro-bending Experiments on the Ni-Base Alloy 718 |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Kubásek Jiří |
28/06/2022 |
17:10 |
17:25 |
Improving the strength of Zn-Mg-Ag bioabsorbable alloys by adjustment of fine-grained microstructure using powder metallurgy techniques. |
See abstract |
Strength of biomedical and bio-inspired materials |
| Kubilay Ekin |
30/06/2022 |
15:05 |
15:20 |
Theory of twin strengthening in fcc high entropy alloys |
See abstract |
Mechanical behaviour of high entropy alloys |
| Kuglstatter Moritz |
28/06/2022 |
16:20 |
16:40 |
The role of the heterostructured interfaces in ARB processed laminated metallic composites (LMCs) |
See abstract |
Effects of grain boundaries and interfaces |
| Kumar Govind |
28/06/2022 |
18:10 |
20:30 |
Development of novel in-situ polymer-derived low carbon steel metal matrix composite using friction stir processing |
See abstract |
Poster Session |
| Kumar Praveen |
27/06/2022 |
12:05 |
12:20 |
Dislocation Creep at Low Stresses and High Temperature: Harper-Dorn Creep Revisited |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Kumar Saurabh |
28/06/2022 |
18:10 |
20:30 |
Heterogeneities in Martensite Through Controlled Deformation in Austenite |
See abstract |
Poster Session |
| Kumar Subodh |
30/06/2022 |
16:10 |
16:25 |
Asymmetric and reverse rolling of AM30 Mg alloy to improve its tensile properties |
See abstract |
Light weighting of structures |
| Kumari Geeta |
28/06/2022 |
13:35 |
13:50 |
Investigation of deformation mechanism for bi-modally distributed γ' precipitates in Allvac 718Plus superalloy |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Lale Mathieu |
28/06/2022 |
18:10 |
20:30 |
Mechanical properties assessment of additive manufactured Ti64 using Small Punch Test |
See abstract |
Poster Session |
| Laplanche Guillaume |
30/06/2022 |
12:05 |
12:20 |
Deformation twinning in polycrystalline medium- and high-entropy alloys |
See abstract |
Mechanical behaviour of high entropy alloys |
| Laszlo Toth |
28/06/2022 |
18:10 |
20:30 |
Experimental Investigations to Increase the Plastic Mould Tool Life |
See abstract |
Poster Session |
| Laube Stephan |
30/06/2022 |
14:20 |
14:35 |
Order phenomena and mechanical properties in refractory high entropy alloys |
See abstract |
Mechanical behaviour of high entropy alloys |
| Lebedkin Mikhail |
28/06/2022 |
13:05 |
13:20 |
Multi-scale complexity of plastic flow during macroscopically stable and unstable flow |
See abstract |
Alain JACQUES † Honorary Symposium |
| Lebedkin Mikhail |
30/06/2022 |
14:35 |
14:50 |
Mesoscopic-Scale Complexity of Plastic Flow in a Al0.3CoCrFeNi High-Entropy Alloy |
See abstract |
Mechanical behaviour of high entropy alloys |
| Legros Marc |
28/06/2022 |
12:05 |
12:20 |
Low cycle Fatigue of Single Crystalline Silicon between 750 and 900°C |
See abstract |
Alain JACQUES † Honorary Symposium |
| Legros Marc |
28/06/2022 |
15:10 |
15:30 |
Dislocation-less plasticity in small-grained metals |
See abstract |
Effects of grain boundaries and interfaces |
| Lehnert Robert |
27/06/2022 |
11:50 |
12:05 |
Superelastic behavior of Fe-Mn-Al-Ni single crystals studied by combination of in situ characterization methods |
See abstract |
Characterization of deformation processes |
| Leonard Aeriel |
01/07/2022 |
11:10 |
11:25 |
Quantifying Damage Evolution During In-situ Loading of Additively Manufactured 316L Stainless Steel Using High Energy X-rays |
See abstract |
Strength of additive-manufactured materials |
| Lipcsei Sandor |
27/06/2022 |
13:35 |
13:50 |
Ex- and in-situ investigation of dislocation cell formation during uniaxial compression of copper single crystal |
See abstract |
Tamas UNGAR Honorary Symposium |
| Liu Chuanlai |
28/06/2022 |
16:40 |
16:55 |
Chemo-mechanical phase-field model for two-sublattice phases: phase precipitation in Al-Zn-Mg-Cu alloys |
See abstract |
Effects of grain boundaries and interfaces |
| Liu Chuanlai |
29/06/2022 |
11:15 |
11:35 |
Finite-strain crystal plasticity-phase field modeling of twin, dislocation and grain boundary interactions in hexagonal materials |
See abstract |
Mechanistic foundations for multiscale modeling |
| Liu Xin |
30/06/2022 |
14:20 |
14:35 |
Prediction for prismatic slip behavior in Mg based on multiple neural network potentials |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Lowe Terry |
28/06/2022 |
10:10 |
10:30 |
High Pressure Compressive Shear of Non-Fully Dense Materials |
See abstract |
Symposium on SPD Materials |
| Lu Kaiju |
30/06/2022 |
12:35 |
12:50 |
Low-cycle fatigue behavior and deformation mechanisms of a dual-phase Al0.5CoCrFeMnNi high-entropy alloy |
See abstract |
Mechanical behaviour of high entropy alloys |
| Lu Yemao |
30/06/2022 |
15:50 |
16:10 |
The mechanical properties and microstructure evolution of nano structured CoCrFeMnNiC2 high entropy alloy after annealing |
See abstract |
Mechanical behaviour of high entropy alloys |
| Macchi Juan |
29/06/2022 |
11:50 |
12:05 |
Modelling of the tensile behavior of low-carbon martensitic steels based on experimentally determined microstructural distributions |
See abstract |
Mechanistic foundations for multiscale modeling |
| Maier-Kiener Verena |
29/06/2022 |
09:00 |
09:30 |
Local Plasticity of Metals upon Phase Transformations – A Complementary Nanoindentation Study |
See abstract |
Plenary Lectures |
| Maj Lukasz |
28/06/2022 |
18:10 |
20:30 |
Tribological behavior of titania coatings produced by micro-arc oxidation method on hydrostatically extruded titanium |
See abstract |
Poster Session |
| Maj Michal |
27/06/2022 |
16:40 |
16:55 |
Experimental analysis of material, lattice and plastic rotation during deformation of aluminum multicrystal |
See abstract |
Characterization of deformation processes |
| Man Jiří |
01/07/2022 |
11:25 |
11:40 |
Stability of 316L stainless steels manufactured by selective laser melting against martensite formation during fatigue |
See abstract |
Strength of additive-manufactured materials |
| Manda Sanjay |
28/06/2022 |
18:10 |
20:30 |
Internal Friction of Steel: A Microstructural Perspective |
See abstract |
Poster Session |
| Manepalli Prasad |
27/06/2022 |
11:15 |
11:35 |
Microstructure, mechanical behavior and electrochemical response of gradient metallic materials produced by electrodeposition |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Mania Izabela |
28/06/2022 |
18:10 |
20:30 |
On twinning and shear banding in copper single crystals of {110}<112>, {112}<111> and {123}<634> initial orientations deformed at high strain rates |
See abstract |
Poster Session |
| Mansoz Benoît |
28/06/2022 |
11:35 |
11:50 |
Effect of chemical composition on yield strength in single crystal Ni-based superalloys at low temperature |
See abstract |
Alain JACQUES † Honorary Symposium |
| Michael Mills |
29/06/2022 |
11:35 |
11:50 |
Fatigue crack initiation and the role of deformation twins in CrCoNi medium-entropy alloy |
See abstract |
Fracture and fatigue |
| Maziarz Wojciech |
28/06/2022 |
18:10 |
20:30 |
Mechanically and magnetically induced strain in additive manufactured NiMnGa-based shape memory alloys |
See abstract |
Poster Session |
| Mishra Kushal |
29/06/2022 |
12:05 |
12:20 |
Effect of strain rate on the uni-axial stress-strain behavior of highly cross-linked epoxy resin |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Miskin Kumar Purshottam |
28/06/2022 |
17:25 |
17:40 |
Molecular dynamics simulations of deformation behaviour of Cu-Al alloys: solute-planar fault interactions |
See abstract |
Effects of grain boundaries and interfaces |
| Mondal Soumita |
27/06/2022 |
12:20 |
12:35 |
Effect of H+ Irradiation on the High-Pressure Torsion Deformed Nb-1wt.%Zr Alloy |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Morel Xavier |
30/06/2022 |
13:05 |
13:20 |
A micromechanical model for the austenite-martensite transformation in hot stamping of automotive steel sheets |
See abstract |
Mechanical behavior associated with phase transformations |
| Morris John |
30/06/2022 |
11:35 |
11:50 |
Mechanisms of Electroplasticity in alpha-Ti |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Mu Xiaoke |
28/06/2022 |
16:55 |
17:10 |
Unveiling the Local Atomic Arrangements in the Shear Band Regions of Metallic Glass |
See abstract |
Glasses and non-crystalline solids |
| Mukhopadhyay Semanti |
29/06/2022 |
11:50 |
12:05 |
Strain localization under monotonic loading near annealing twin boundaries |
See abstract |
Effects of grain boundaries and interfaces |
| Murugan Siva Prasad |
30/06/2022 |
15:05 |
15:20 |
Unravelling hydrogen effects on elasticity and plasticity mechanisms in nickel single crystal using nanoindentation |
See abstract |
Micro- and nano-scale mechanical testing |
| Musial‚ Sandra |
27/06/2022 |
16:55 |
17:10 |
Field analysis of energy conversion during plastic deformation process |
See abstract |
Characterization of deformation processes |
| Musza Alexandra |
28/06/2022 |
18:10 |
20:30 |
Study of anodic film's surface and hardness on A356 aluminium alloys |
See abstract |
Poster Session |
| N Kumaran Surya |
28/06/2022 |
11:50 |
12:05 |
Behavior during severe plastic deformation of the Al6(CoFeMnNi) high entropy alloy: experiments and crystal plasticity simulations |
See abstract |
Symposium on SPD Materials |
| Nag Shankha |
30/06/2022 |
11:50 |
12:05 |
Deformation behaviour of (CoCrFeMn)1-xNix cantor alloy |
See abstract |
Mechanical behaviour of high entropy alloys |
| Nair Jitin |
30/06/2022 |
14:35 |
14:50 |
Elastic Inhomogeneity Effects on Spinodal Decomposition in Ternary Alloys |
See abstract |
Mechanical behavior associated with phase transformations |
| Nasiri Samaneh |
28/06/2022 |
18:10 |
20:30 |
Effects of elasticity and dislocation core structure on the interaction of dislocations with embedded CNTs in aluminium: An atomistic simulation study |
See abstract |
Poster Session |
| Neumeier Steffen |
28/06/2022 |
11:10 |
10:30 |
Evolution of the high temperature lattice misfit of highly alloyed single crystalline Ni-base superalloys |
See abstract |
Alain JACQUES † Honorary Symposium |
| Novelli Marc |
30/06/2022 |
14:00 |
14:20 |
Hydrogen embrittlement of a CrMnFeCoNi high-entropy alloy treated by ultrasonic shot peening |
See abstract |
Mechanical behaviour of high entropy alloys |
| Nugmanov Dayan |
27/06/2022 |
12:20 |
12:35 |
Enhanced uniform elongation in the SPD-processed Cu-Fe hybrid materials with helical architecture |
See abstract |
Symposium on SPD Materials |
| Nyikes Zoltán |
28/06/2022 |
18:10 |
20:30 |
Explosion effect on the mechanical properties of the investigated stainless steel |
See abstract |
Poster Session |
| Ochoa-Avendaño Jhon |
28/06/2022 |
18:10 |
20:30 |
Nucleation texture prediction of IF Steel based on the Advanced-Lamel Crystal Plasticity code |
See abstract |
Poster Session |
| Oláh Ferenc |
28/06/2022 |
18:10 |
20:30 |
Investigation of the hydrostatic and plastic zones of hardness measurement using finite element simulation |
See abstract |
Poster Session |
| Ovri Henry |
30/06/2022 |
12:20 |
12:35 |
On the mechanistic origin of the enhanced strength and ductility in Mg-RE alloys |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Oyarzabal Ítalo |
27/06/2022 |
10:30 |
10:45 |
(S)TEM characterization of retained austenite in a 3rd generation AHSS medium-Mn steel |
See abstract |
Characterization of deformation processes |
| P Shruti |
28/06/2022 |
18:10 |
20:30 |
Effect of cold work on creep deformation behaviour of austenitic stainless steel 304HCu |
See abstract |
Poster Session |
| Padmaganesan Haripria |
28/06/2022 |
16:55 |
17:10 |
Thermal stability and high temperature deformation behavior of microstructurally graded nickel |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Paliwal Deepak |
30/06/2022 |
10:30 |
10:45 |
Improving Strength Ductility Trade-off by Gradient Microstructure in OFHC pure Copper |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Pandey Keerti |
28/06/2022 |
16:20 |
16:40 |
On the underlying mechanisms in binary Ni-based nanocrystalline alloys |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Pant Prita |
30/06/2022 |
14:50 |
15:05 |
Solid solution “softening” in copper-aluminum alloys |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Pantleon Wolfgang |
27/06/2022 |
16:20 |
16:40 |
Curious rise in peak profile asymmetry during unloading in cyclic deformation |
See abstract |
Tamas UNGAR Honorary Symposium |
| Paranjape Sanika |
28/06/2022 |
18:10 |
20:30 |
Polymer derived ceramic reinforced magnesium-based metal matrix composite |
See abstract |
Poster Session |
| Pardoen Thomas |
27/06/2022 |
09:30 |
10:00 |
On the best compromise between strength, ductility and fracture toughness in metallic alloys |
See abstract |
Plenary Lectures |
| Parsa Alireza |
28/06/2022 |
15:30 |
15:45 |
Taking a new look at rafting in single crystal superalloys: Exploring the influence of different stress states and the transition towards topological inversion |
See abstract |
Alain JACQUES † Honorary Symposium |
| Patra Achintya |
28/06/2022 |
18:10 |
20:30 |
Investigation of the unique staircase type strain hardening behavior in a medium Mn steel |
See abstract |
Poster Session |
| Paul Henryk |
28/06/2022 |
17:25 |
17:40 |
Structural strengthening and softening mechanisms in the bonding zone of explosively welded sheets |
See abstract |
Materials under extreme conditions |
| Pelligra Connie |
27/06/2022 |
17:25 |
17:40 |
How to adapt Micro-Speckle Patterning to achieve High Resolution Strain Imaging during In situ Scanning Electron Microscope (SEM) tensile testing |
See abstract |
Characterization of deformation processes |
| Pelligra Connie |
28/06/2022 |
18:10 |
20:30 |
The Role of Transformation Induced Plasticity on Damage Development in a Third Generation prototype Medium Mn Advanced High Strength Steel |
See abstract |
Poster Session |
| Piotrowski Boris |
30/06/2022 |
11:35 |
11:50 |
Simulation of CuAlBe tensile test using SMA constitutive law and comparison with in-situ synchrotron data |
See abstract |
Mechanical behavior associated with phase transformations |
| Pippan Reinhard |
28/06/2022 |
11:15 |
11:35 |
Mechanics of materials Hardening by annealing in nanocrystalline PtRu: A further grain size dependent issue |
See abstract |
Symposium on SPD Materials |
| Poczklán Ladislav |
29/06/2022 |
12:50 |
13:05 |
Comparison of crack growth rate of 316L steel in axial/torsional in-phase and out-of-phase cyclic loading mode |
See abstract |
Fracture and fatigue |
| Pontillo Antonio |
28/06/2022 |
18:10 |
20:30 |
Effect of the stress state and strain rate on deformation-induced transformation in medium-Mn steels |
See abstract |
Poster Session |
| Poquillon Dominique |
29/06/2022 |
10:10 |
10:30 |
Effect of thickness of ultra-thin Ti6242S alloy specimens on tensile strength at 450°C in air and argon atmosphere |
See abstract |
Effects of grain boundaries and interfaces |
| Preisler Dalibor |
30/06/2022 |
14:00 |
14:20 |
Achieving stress-induced martensitic transformation in metastable beta-Ti alloys with high oxygen content |
See abstract |
Mechanical behavior associated with phase transformations |
| Preuss Michael |
28/06/2022 |
14:30 |
15:00 |
Strain localisation in engineering alloys – quantifying discrete shear to improve understanding of strain hardening and crack initiation |
See abstract |
Plenary Lectures |
| Preuss Michael |
27/06/2022 |
17:25 |
17:40 |
Using diffraction line profile analysis to understand irradiation-induced growth in nuclear fuel cladding |
See abstract |
Tamas UNGAR Honorary Symposium |
| Kumaran Surya |
28/06/2022 |
18:10 |
20:30 |
Effect of a sequence of layers on microstructure and mechanical properties of ultra-fine grained AA2024/AA5038 laminated composites produced by accumulative roll bonding (ARB) |
See abstract |
Poster Session |
| Rahbarniazi Masoud |
30/06/2022 |
11:50 |
12:05 |
Solute effects on prismatic slip in Mg alloys |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Rajulapati Koteswararao V |
28/06/2022 |
16:40 |
16:55 |
Strengthening characteristics of multi-phase, multi-principal element alloys probed by indentation methods |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Anna Fraczkiewiczc |
28/06/2022 |
18:10 |
20:30 |
Novel Co-free multi principal element alloys (MPEAs) for nuclear applications: computational design and experimental evaluation |
See abstract |
Poster Session |
| Ranjan Shreshtha |
28/06/2022 |
18:10 |
20:30 |
Response of shock wave deformation on the evolution of microstructure and texture in magnesium |
See abstract |
Poster Session |
| Rao You |
30/06/2022 |
16:10 |
16:25 |
Theory-guided Design of High-strength, Ductile, Single-phase BCC High Entropy Alloys |
See abstract |
Mechanical behaviour of high entropy alloys |
| Rateau Lisa |
30/06/2022 |
16:40 |
16:55 |
Co-free wear-resistant alloys for nuclear applications: design and characterization |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Reddy Tejanath |
28/06/2022 |
18:10 |
20:30 |
Micromechanical response of commercially pure titanium Insights from experiments and simulations |
See abstract |
Poster Session |
| Renk Oliver |
28/06/2022 |
17:40 |
17:55 |
Mitigating the detrimental effects of galvanic corrosion in high strength Mg composites by nanoscale architecture design |
See abstract |
Strength of biomedical and bio-inspired materials |
| Ribarik Gabor |
28/06/2022 |
18:10 |
20:30 |
Application of artificial intelligence algorithms for phase analysis |
See abstract |
Poster Session |
| Ribarik Gabor |
27/06/2022 |
11:50 |
12:05 |
Investigation of crystal defects by molecular dynamics simulations |
See abstract |
Tamas UNGAR Honorary Symposium |
| Richeton Thiebaud |
29/06/2022 |
13:20 |
13:55 |
Study of double-ended dislocation pile-ups in heterogeneous anisotropic elasticity |
See abstract |
Effects of grain boundaries and interfaces |
| Rosenkranz Laura |
28/06/2022 |
18:10 |
20:30 |
The tensile strength of hexagonal closest-packed rare earth high-, medium- and low-entropy alloys |
See abstract |
Poster Session |
| Růžek Roman |
28/06/2022 |
18:10 |
20:30 |
Experimental analysis of thermoplastic composite stiffened panel under compression |
See abstract |
Poster Session |
| Ryu Ill |
29/06/2022 |
10:10 |
10:30 |
Defects Dynamics Element Models for Nanoindentation: Effect of Indenter Radius, Initial Density and Crystal Orientation on Incipient Plasticity |
See abstract |
Mechanistic foundations for multiscale modeling |
| S Abhijith |
28/06/2022 |
18:10 |
20:30 |
High-temperature deformation behavior of Nb-stabilized austenitic stainless steels |
See abstract |
Poster Session |
| S Sabari Rajan |
28/06/2022 |
18:10 |
20:30 |
High temperature deformation behavior of additively manufactured Inconel 718 |
See abstract |
Poster Session |
| Sahoo Sudeep Kumar |
29/06/2022 |
13:20 |
13:35 |
Assessing the importance of Taylor Factor in the context of viscoplastic self-consistent modelling |
See abstract |
Mechanistic foundations for multiscale modeling |
| Sahu Vivek Kumar |
28/06/2022 |
11:35 |
11:50 |
Micro-mechanisms of Anisotropic Deformation in the |
See abstract |
Characterization of deformation processes |
| Presence of Notch in Commercially Pure Titanium: an In |
| situ Study with CPFEM |
| Sahu Vivek Kumar |
28/06/2022 |
18:10 |
20:30 |
The Role of Multivariant Twinning on J-integral Value in |
See abstract |
Poster Session |
| Commercially Pure Titanium |
| Saimoto Shigeo |
29/06/2022 |
11:15 |
11:35 |
Constitutive Relations and Plastic Work Analyses of Work-Hardening in FCC Metals: Evolution of Stored Work |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Sarkar Prakash |
28/06/2022 |
18:10 |
20:30 |
Investigation of Recovery Phenomenon at Room Temperature of a Glassy SU-8 Thermoset |
See abstract |
Poster Session |
| Sarkar Prakash |
30/06/2022 |
11:50 |
12:05 |
First Principles Analysis of Materials Response of Amorphous Glassy Polymers to Nanoindentation |
See abstract |
Micro- and nano-scale mechanical testing |
| Šašek Stanislav |
28/06/2022 |
12:20 |
12:35 |
Fine-grained magnesium alloy designed for aviation applications |
See abstract |
Symposium on SPD Materials |
| Satyampet Poornachandra |
30/06/2022 |
16:55 |
17:10 |
Twinning induced plasticity during yield point elongation in medium manganese steels |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Satyampet Poornachandra |
28/06/2022 |
18:10 |
20:30 |
Strain path effect on martensitic transformation in medium Mn steels. |
See abstract |
Poster Session |
| Sauvage Xavier |
27/06/2022 |
16:20 |
16:40 |
Mechanical and electrical properties of a nanostructured Al-Ca alloy |
See abstract |
Symposium on SPD Materials |
| Sboui Bassem |
30/06/2022 |
12:20 |
12:35 |
Elastic model of BCC high entropy alloys. |
See abstract |
Mechanical behaviour of high entropy alloys |
| Schenk Thomas |
28/06/2022 |
10:30 |
10:45 |
Simulation of in situ X-Ray Diffraction peaks of single crystal Superalloys |
See abstract |
Alain JACQUES † Honorary Symposium |
| Schichtel Jacob |
28/06/2022 |
17:40 |
17:55 |
Modeling the coupling of damage and diffusion-driven oxidation in ceramic matrix composites |
See abstract |
Materials under extreme conditions |
| Schliephake Daniel |
30/06/2022 |
15:50 |
16:10 |
Age-hardening behavior of an Al-Mn-Mg-Sc-Zr alloy subsequent to additive manufacturing and cold working |
See abstract |
Light weighting of structures |
| Schouwenaars Rafael |
30/06/2022 |
14:00 |
14:20 |
A statistical analysis of the interaction between grain boundary and forest hardening |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Schwaiger Ruth |
28/06/2022 |
09:00 |
09:30 |
Insights into plasticity by combining nanomechanics, high-resolution characterization and simulation |
See abstract |
Plenary Lectures |
| Sekkal Saif Eddine |
28/06/2022 |
17:40 |
17:55 |
Experimental and multi-scale numerical investigation of the mechanical responses for recycled chopped strand woven reinforced thermoplastic composites |
See abstract |
Composite materials |
| Seo Yeon Jo |
28/06/2022 |
15:10 |
15:30 |
An Integrated Computational Modeling of Deformation, Microstructure Evolution and Phase Transformation: Application to Multi-Pass Hot Rolling and Quenching |
See abstract |
Integrated computational materials engineering |
| Sepsi Máté |
27/06/2022 |
15:30 |
15:45 |
Metal bonding by Friction-Assisted Lateral Extrusion Process (FALEP) at room temperature |
See abstract |
Symposium on SPD Materials |
| Sidor Jurij |
27/06/2022 |
15:10 |
15:30 |
Evolution of dislocations and texture in cold-rolled and annealed aluminum alloys |
See abstract |
Characterization of deformation processes |
| Sierra-Soraluce Andres |
29/06/2022 |
12:05 |
12:20 |
High-cycle fatigue behaviour of Quenching and Partitioning (Q&P) treated stainless steels |
See abstract |
Fracture and fatigue |
| Singh Vivek |
28/06/2022 |
18:10 |
20:30 |
Understanding the strengthening by annealing in cold rolled NiCrCo medium entropy alloy |
See abstract |
Poster Session |
| Škraban Tomáš |
30/06/2022 |
11:50 |
12:05 |
Theoretical description of martensite transformation in beta-Ti alloys |
See abstract |
Mechanical behavior associated with phase transformations |
| Skrotzki Werner |
27/06/2022 |
10:10 |
10:30 |
Phase transformation in CrMnFeCoNi high-entropy alloy induced by high pressure torsion |
See abstract |
Tamas UNGAR Honorary Symposium |
| Slagter Alejandra |
30/06/2022 |
14:20 |
14:35 |
Micromechanics of oxide inclusions in ferrous alloys: inclusion strength |
See abstract |
Micro- and nano-scale mechanical testing |
| Šlapáková Michaela |
28/06/2022 |
17:25 |
17:40 |
Deformation of Aluminium-steel Clad Material Prepared by Twin-roll Casting |
See abstract |
Composite materials |
| Sobti Apoorv |
28/06/2022 |
18:10 |
20:30 |
Improving mechanical properties of nano-bainitic steels |
See abstract |
Poster Session |
| Sonawane Dipali |
27/06/2022 |
17:10 |
17:25 |
Insights into the Fracture of Si in Cu-filled Through Silicon Via (Cu-TSV) during Annealing and Post-annealing Natural Ageing |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Soriano Bardon Lucas |
29/06/2022 |
11:35 |
11:50 |
Influence of welding on the ductility of a Fe-Nb-V-C microalloyed steel |
See abstract |
Mechanistic foundations for multiscale modeling |
| Sourav Ayush |
30/06/2022 |
16:40 |
16:55 |
Superposition of strengthening mechanisms in hot forged AlxCoCrFeNi high entropy alloys |
See abstract |
Mechanical behaviour of high entropy alloys |
| Srinivasan Tirunilai Aditya |
28/06/2022 |
16:55 |
17:10 |
Discontinuous deformation of FCC high entropy alloys at temperatures close to 0 K |
See abstract |
Materials under extreme conditions |
| Starikov Sergei |
29/06/2022 |
13:05 |
13:20 |
Macroscopic characteristics of plastic deformation in bcc metals described through dislocation mobility properties |
See abstract |
Mechanistic foundations for multiscale modeling |
| Stinville Jean-Charles |
29/06/2022 |
11:15 |
11:35 |
Slip Localization and the Prediction of Fatigue Strength of Polycrystalline Alloys |
See abstract |
Fracture and fatigue |
| Stoklasova Pavla |
30/06/2022 |
14:20 |
14:35 |
Elastic Characterization of Beta-Ti15Mo by Transient Grating Spectroscopy |
See abstract |
Mechanical behavior associated with phase transformations |
| Straumal Boris |
28/06/2022 |
18:10 |
20:30 |
High pressure torsion of Cu–Ag alloys at room temperature and 77 K |
See abstract |
Poster Session |
| Sun Qian |
30/06/2022 |
13:20 |
13:35 |
A study on shape recovery in Fe-Mn-Si shape memory alloy under cyclic thermo-compressive loading |
See abstract |
Mechanical behavior associated with phase transformations |
| Suwas Satyam |
27/06/2022 |
10:10 |
10:30 |
Additivity of Strengthening Mechanisms in Severe Plastically Deformed Metals and Alloys |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Swetha Singam |
28/06/2022 |
18:10 |
20:30 |
Effect of high pressure torsion on microstructure evolution and mechanical behavior of Al-Mg-Sc-Zr alloy |
See abstract |
Poster Session |
| Szabó Peter |
27/06/2022 |
13:05 |
13:20 |
Multiaxial forging of low carbon – low alloy ferritic steel |
See abstract |
Tamas UNGAR Honorary Symposium |
| Szűcs Máté |
01/07/2022 |
09:00 |
09:20 |
Prediction of flow stress of Nb40Ti60 alloy in hot deformation |
See abstract |
High temperature deformation and creep |
| Tavakkolisaiej Vahid |
28/06/2022 |
18:10 |
20:30 |
Precipitation role in strengthening and improved conductivity of HPTE-processed Al-Mg-Si alloy |
See abstract |
Poster Session |
| Tayari Tomáš |
30/06/2022 |
14:50 |
15:45 |
Unusual plastic instabilities in entropy alloys at elevated temperatures |
See abstract |
Mechanical behaviour of high entropy alloys |
| Telpande Swanand |
28/06/2022 |
15:30 |
15:45 |
Synergistic effect of external magnetic field on initiation of crack propagation in pre-cracked current-carrying Al foil |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Texier Damien |
27/06/2022 |
10:10 |
10:30 |
Investigation of sub-grain deformation processes of an In718 Alloy from room temperature to high temperature using High-Resolution Digital Image Correlation |
See abstract |
Characterization of deformation processes |
| Texier Damien |
28/06/2022 |
18:10 |
20:30 |
Multi-modal analyses of nanoindentation properties at the sub-grain level in Ni-based and Ti-based polycrystalline alloys |
See abstract |
Poster Session |
| Thiercelin Léo |
01/07/2022 |
09:20 |
09:35 |
A Viscoplastic model with thermally activated hardening recovery for metallic alloys: application to stainless steel welding |
See abstract |
High temperature deformation and creep |
| Thilly Ludovic |
28/06/2022 |
15:10 |
15:30 |
Revealing the role of microstructure architecture on strength and ductility of Ni microwires by in-situ synchrotron X-Ray diffraction |
See abstract |
Atul CHOKSHI Honorary Symposium |
| Tome Carlos |
29/06/2022 |
10:10 |
10:30 |
A 3-dimensional perspective on twin growth and transmission in HCP metals |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Tournay Mélaine |
28/06/2022 |
18:10 |
20:30 |
Microstructural and textural evolution during cold unidirectional rolling (UR) and cold cross-rolling (CR) of near alpha titanium alloy Ti-3Al-2.5V |
See abstract |
Poster Session |
| Traversier Mathieu |
30/06/2022 |
16:25 |
16:40 |
Mechanical improvement of a Co-free high entropy alloy with nitrogen addition |
See abstract |
Mechanical behaviour of high entropy alloys |
| Tripathi Nikhil |
27/06/2022 |
11:50 |
12:05 |
Effect of Die Design on Microstructure and Mechanical Properties of Pure Copper |
See abstract |
Symposium on SPD Materials |
| Tsekpuia Eyram |
29/06/2022 |
12:05 |
12:20 |
Numerical implementation of a micromechanical elastoviscoplastic homogenization model for austenitic-ferritic stainless steels |
See abstract |
Mechanistic foundations for multiscale modeling |
| Umasankar Chintada |
28/06/2022 |
18:10 |
20:30 |
Evolution of microstructure and its influence on stretch-flange-formability in thermo-mechanically controlled processed (TMCP) quenched and partitioned (Q&P) steel |
See abstract |
Poster Session |
| Ungar Tamas |
27/06/2022 |
10:30 |
10:45 |
Partial dislocation densities and character in different slip modes from X-ray powder diffraction patterns |
See abstract |
Tamas UNGAR Honorary Symposium |
| Van Petegem Steven |
01/07/2022 |
10:50 |
11:10 |
Tuning the mechanical properties of Ti-6Al-4V-3Fe by in situ alloying during laser powder bed fusion |
See abstract |
Strength of additive-manufactured materials |
| Van Swygenhoven Helena |
30/06/2022 |
09:00 |
09:30 |
Manufacturing alloys in the synchrotron |
See abstract |
Plenary Lectures |
| Varma R. Arjun |
30/06/2022 |
10:30 |
10:45 |
Phase transformation assisted by dislocation-solute interactions |
See abstract |
Mechanical behavior associated with phase transformations |
| Verma Sandhya |
29/06/2022 |
11:15 |
11:35 |
Misorientation development near high angle grain boundary and Σ3 boundaries in pure copper and copper-8 wt. % aluminium alloy |
See abstract |
Effects of grain boundaries and interfaces |
| Verma Sandhya |
30/06/2022 |
14:50 |
15:05 |
Novel method for correction of thermal drift in nanoindentation experiments |
See abstract |
Micro- and nano-scale mechanical testing |
| Viguier Bernard |
28/06/2022 |
15:10 |
15:30 |
Elastic properties of the α' martensite in Ti-6Al-4V alloy processed by powder bed-laser beam melting |
See abstract |
Alain JACQUES † Honorary Symposium |
| Wagner Ruben |
30/06/2022 |
12:05 |
12:20 |
Importance of combined cleaning filter systems for removal of non-metallic inclusions in 42CrMo4 steel |
See abstract |
Micro- and nano-scale mechanical testing |
| Wang Hongcai |
01/07/2022 |
11:10 |
11:25 |
TEM Replica Analysis of Particles in a Tempered Martensite Ferritic Steel after Long Term Creep |
See abstract |
High temperature deformation and creep |
| Wang Jian |
28/06/2022 |
17:10 |
17:25 |
High-strength crystal-amorphous Ni-SiOC nanocomposites with superb plastic flow stability |
See abstract |
Composite materials |
| Watroba Maria |
28/06/2022 |
18:10 |
20:30 |
Experimental measurements of critical resolved shear stress in pure Zn and Zn-Ag alloys using micropillars compression |
See abstract |
Poster Session |
| Weidner Anja |
27/06/2022 |
11:15 |
11:35 |
Studies on the functional degradation of Fe–Mn–Al–Ni shape memory alloy under compression using acoustic emission measurements |
See abstract |
Characterization of deformation processes |
| Weidner Anja |
28/06/2022 |
18:10 |
20:30 |
Very high cycle fatigue behaviour of additively manufactured TiAl 48-2-2 at 700°C |
See abstract |
Poster Session |
| Weidner Timmo |
27/06/2022 |
17:55 |
18:10 |
Evidence of dislocation climb in naturally deformed quartz by electron tomography of dislocations |
See abstract |
Characterization of deformation processes |
| Wheeler Jeffrey M. |
30/06/2022 |
16:10 |
16:25 |
Mechanical Microscopy Using Correlative Nanoindentation and Analytical Electron Microscopy |
See abstract |
Micro- and nano-scale mechanical testing |
| Wilkinson David |
29/06/2022 |
10:10 |
10:30 |
The Development of Damage-Tolerant Advanced High Strength Steels |
See abstract |
Fracture and fatigue |
| Winkens Georg |
30/06/2022 |
16:25 |
16:40 |
Solid Solution Hardening in bcc Mo-Ti solid solutions produced via arc-melting |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Wójcik Anna |
30/06/2022 |
13:35 |
13:50 |
Giant magnetic field-induced strains in textured Ni-Mn-Ga and Ni-Mn-Ga-Fe melt-spun ribbons |
See abstract |
Mechanical behavior associated with phase transformations |
| Wolke Stefan |
29/06/2022 |
12:20 |
12:35 |
Influence of the surface morphology on the cyclic deformation behavior of a high manganese TWIP steel |
See abstract |
Fracture and fatigue |
| Won Jung Yun |
27/06/2022 |
12:05 |
12:20 |
Characterization of interfacial mechanical properties of carbon steel-stainless steel corrosion resistant clad plate |
See abstract |
Characterization of deformation processes |
| Wu Xian |
28/06/2022 |
18:10 |
20:30 |
Mechanical behavior of carbon-bonded alumina foam materials based on a lactose-tannin binder system at high temperatures |
See abstract |
Poster Session |
| Wurster Stefan |
27/06/2022 |
12:35 |
12:50 |
FeCr Composites Processed by Multiple High-Pressure Torsion Steps |
See abstract |
Symposium on SPD Materials |
| Xie Zhuocheng |
29/06/2022 |
12:35 |
12:50 |
Unveiling the mechanisms of motion of synchro-Shockley dislocations in Laves phases |
See abstract |
Elementary deformation mechanisms in engineering materials |
| Yang Yitong |
28/06/2022 |
18:10 |
20:30 |
In-situ investigation on cyclic bending deformation of oligo-crystalline 316LVM steel for coronary stent application with EBSD |
See abstract |
Poster Session |
| Yavuzyegit Berzah |
01/07/2022 |
09:35 |
09:50 |
An in situ study of deformation mechanisms in AZ31 and WE43 Mg alloy at elevated temperatures |
See abstract |
High temperature deformation and creep |
| Takeshi IWAMOTO |
29/06/2022 |
10:30 |
10:45 |
The evaluation of rate sensitivity in fracture toughness of SUS304 by small punch test |
See abstract |
Fracture and fatigue |
| Zehetbauer Michael |
27/06/2022 |
10:10 |
10:30 |
Bulk Nanocrystalline Soft Magnetic Fe-Si-X Alloys Achieved Through Severe Plastic Deformation |
See abstract |
Symposium on SPD Materials |
| Zhang Zaoli |
30/06/2022 |
10:10 |
10:30 |
Atomic-scale understanding of deformation process triggered by nanoindentation |
See abstract |
Micro- and nano-scale mechanical testing |
| Zimmerman Jonathan |
30/06/2022 |
15:50 |
16:10 |
Size and Shape Effects on the Strength of Platinum Nanoparticles |
See abstract |
Micro- and nano-scale mechanical testing |
| Zoltan Hegedues |
27/06/2022 |
11:35 |
11:50 |
High-resolution diffraction at the Swedish high-energy materials science beamline P21.2 at PETRA III |
See abstract |
Tamas UNGAR Honorary Symposium |
Loading...